Home » Husqvarna Manuals » Lawn Mowers » Husqvarna AUTOMOWER 315X with installation service » Manual Viewer

Husqvarna AUTOMOWER 315X with installation service Owner Manual - Page 27

To set the Weather timer frequency, Lawn Coverage, GPS Assisted Navigation

View all Husqvarna AUTOMOWER 315X with installation service manuals

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

2. Use the arrow buttons and the OK button to move through the menu structure Weather timer > Use Weather timer. 3. Push the OK button to select the Weather timer. 4. Push the BACK button. 3.10.4.2 To set the Weather timer frequency Set how frequently the product cuts the grass when the Weather timer is in use. There are 3 frequency levels: Low, Mid and High. The higher the frequency, the more sensitive the product is to the grass growth. That is, if the grass growth is high then the product is allowed to work longer. Note: If the mowing results are not optimal when using Weather timer, the schedule settings may need adjusting. Do not restrict the schedule more than necessary. Also, check that the blade disc is clean and that the blades are in good condition. 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Weather timer > Cutting time. 3. Use the arrow buttons to select Low, Mid or High frequency. 4. Push the BACK button. 3.10.5 Lawn Coverage If the work area includes remote parts that are connected with narrow passages, the Lawn Coverage function is useful to be able to maintain a well-cut lawn in all parts of the yard. A guide wire must be installed to use the functions. You can set a maximum of 3 remote areas. With the Lawn Coverage function the product first follows and then leaves the guide wire after a certain distance and starts to mow the lawn. Area A, approximately 50% Area B, approximately 30% Area C, approximately 20% C A B 3.10.5.1 GPS Assisted Navigation Only for Automower® 315X. The GPS Assisted Navigation function helps the product to select the most optimal operation. Use the Lawn coverage function to do manual settings. To set the GPS Assisted Navigation Disable the GPS Assisted Navigation to make manual settings in Lawn coverage. Note: It is recommended to use GPS Assisted Navigation. 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Installation > Lawn coverage. 3. Push the OK button to enble or disable the function. 4. Push the BACK button. 3.10.5.2 To set the Lawn Coverage function 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Installation > Lawn Coverage > Area 1-3. 3. Use the arrow button to select the area. 4. Push the OK button. 5. Measure the distance from the charging station to the start of the area. Measure along the guide wire. Refer to To measure 1440 - 002 - 19.02.2020 Installation - 27

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Product overview Automower® 310/315/315X	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety information	10
IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE	10
Safety definitions	11
Safety instructions for operation	11
Use	11
Battery safety	12
How to lift and move the product	12
Maintenance	13
In the event of a thunderstorm	13
Installation	15
Introduction - Installation	15
Main components for installation	15
General preparations	15
Before the installation of the wires	15
To examine where to put the charging station	15
To examine where to put the power supply	16
To examine where to put the boundary wire	16
To put the boundary wire in a slope	18
Passages	18
To make an island	18
To make a secondary area	19
To examine where to put the guide wire	19
Work area examples	20
Installation of the product	20
Installation tools	20
To install the charging station	20
To install the boundary wire	21
To install the guide wire	22
To put the wire into position with stakes	22
To bury the boundary wire or the guide wire	23
To extend the boundary wire or the guide wire	23
After the installation of the product	23
To do a visual check of the charging station	23
To do the basic settings	23
Calibration	24
To do the product settings	24
Menu structure	24
To get access to the menu	24
Schedule	24
To set the schedule	24
To calculate the suitable operating hours	24
To copy the schedule setting	25
To reset the schedule setting	25
Security level	25
To set the security level	25
To create a New loop signal	25
To change the PIN-code	26
To change the length of the alarm	26
To change the length of the time lock	26
Messages	26
To read the messages	26
Weather timer	26
To set the Weather timer	26
To set the Weather timer frequency	27
Lawn Coverage	27
GPS Assisted Navigation	27
To set the GPS Assisted Navigation	27
To set the Lawn Coverage function	27
To do a test of the Lawn Coverage function	28
To measure the distance from the charging station	28
To disable or enable the Lawn Coverage function	28
To reset the Lawn Coverage settings	28
Methods for the product to find the charging station	28
To set how the product finds the charging station	29
To do a test of the guide wire	29
To do a test of the boundary wire	29
To change the signal range of the charging station	29
Corridor width	29
To set the corridor width	30
Exit angle	30
To set the exit angle	30
Reversing distance	30
To set the reversing distance	30
Drive Past Wire function	30
To set the Drive Past Wire function	30
Settings	30
Profiles	31
To save settings to a profile	31
To change the name of a profile	31
To use a profile	31
To connect a new charging station to a profile	31
ECO mode	31
To set the ECO mode	31
Spiral Cutting	31
To set the Spiral Cutting	31
To set the level of Spiral Cutting	32
Slope control	32
To set the Slope control	32
General	32
To set the time & date	32
To set the language	32
To set the Country & Timezone	32
To set the unit format	32
To reset all user settings	32
The About menu	32
Accessories	33
Information	33
Automower® Connect app	33
To install the Automower® Connect app	33
Automower® Connect@Home	33
To pair Connect@Home and the product	33
To remove paired accounts	33
Automower® Connect	33
To pair Automower® Connect and the product	33
To enable the GeoFence function	34
To set a new center point for the Geofence function	34
To set the GeoFence level of sensitivity	34
To use the SMS function	34
Network	34
APN settings	34
Headlights Automower® 315X	34
To set the schedule for the headlights	34
To set the Flashes when fault function	34
To avoid collisions with the mower house	35
Operation	36
Main switch	36
To start the product	36
Operating mode Start	36
Main area	36
Secondary area	36
Override schedule	37
Spot cutting	37
Operating mode Park	37
Park until further notice	37
Start again with next schedule	37
To stop the product	37
To switch off the product	37
Schedule and Standby	37
Example 1	38
Example 2	38
To charge the battery	38
Adjust the cutting height	39
To adjust the cutting height	39
Maintenance	40
Introduction - maintenance	40
Clean the product	40
Chassis and blade disc	40
Wheels	40
The body of the product	40
Charging station	40
Replace the blades	41
To replace the blades	41
Battery	41
Winter service	42
Troubleshooting	43
Introduction - troubleshooting	43
Fault messages	43
Information messages	48
Indicator lamp in the charging station	49
Symptoms	50
Find breaks in the loop wire	51
Transportation, storage and disposal	54
Transportation	54
Storage	54
Disposal	54
To remove the battery	54
Technical data	55
Technical data	55
Registered trademarks	57
Warranty	58
Warranty terms	58
EC Declaration of Conformity	59

Match case Limit results 1 per page

Use the

arrow

buttons and the

button to

move through the menu structure

Weather

timer > Use Weather timer

Push the

button to select the

Weather

timer

Push the

BACK

button.

3.10.4.2 To set the Weather timer frequency

Set how frequently the product cuts the grass

when the

Weather timer

is in use. There are 3

frequency levels:

Low, Mid

and

High

. The higher

the frequency, the more sensitive the product is

to the grass growth. That is, if the grass growth is

high then the product is allowed to work longer.

Note:

If the mowing results are not optimal when

using

Weather timer

, the schedule settings may

need adjusting. Do not restrict the schedule more

than necessary. Also, check that the blade disc is

clean and that the blades are in good condition.

Do steps 1–3 in

To get access to the menu

on page 24

Use the

arrow

buttons and the

button to

move through the menu structure

Weather

timer > Cutting time

Use the

arrow

buttons to select

Low, Mid

High

frequency.

Push the

BACK

button.

3.10.5 Lawn Coverage

If the work area includes remote parts that are

connected with narrow passages, the

Lawn

Coverage

function is useful to be able to maintain

a well-cut lawn in all parts of the yard. A guide

wire must be installed to use the functions. You

can set a maximum of 3 remote areas.

With the

Lawn Coverage

function the product first

follows and then leaves the guide wire after a

certain distance and starts to mow the lawn.

Area A, approximately 50%

Area B, approximately 30%

Area C, approximately 20%

3.10.5.1 GPS Assisted Navigation

Only for Automower

315X.

The GPS Assisted Navigation function helps the

product to select the most optimal operation. Use

the Lawn coverage function to do manual

settings.

To set the GPS Assisted Navigation

Disable the GPS Assisted Navigation to make

manual settings in

Lawn coverage

Note:

It is recommended to use GPS Assisted

Navigation.

Do steps 1–3 in

To get access to the menu

on page 24

Use the

arrow

buttons and the

button to

move through the menu structure

Installation

> Lawn coverage

Push the

button to enble or disable the

function.

Push the

BACK

button.

3.10.5.2 To set the Lawn Coverage function

Do steps 1–3 in

To get access to the menu

on page 24

Use the

arrow

buttons and the

button to

move through the menu structure

Installation

> Lawn Coverage > Area 1-3

Use the

arrow

button to select the area.

Push the

button.

Measure the distance from the charging

station to the start of the area. Measure

along the guide wire. Refer to

To measure

1440 - 002 - 19.02.2020

Installation -