Home » Husqvarna Manuals » Lawn Mowers » Husqvarna AUTOMOWER 315X with installation service » Manual Viewer

Husqvarna AUTOMOWER 315X with installation service Owner Manual - Page 38

Example 1, To charge the battery, 7.1 Example 1

View all Husqvarna AUTOMOWER 315X with installation service manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Product work capacity Automower® 310 Automower® 315 Automower® 315X Standby time, minimum hours per day 6 2 2 4.7.1 Example 1 This example is applicable to products with a specified work area of 1000 m2, but the principle is the same for the other models. Schedule setting, Period 1: 00:00-24:00 Active period (A): 00:00-18:00 The schedule settings ensure that the product begins cutting the lawn at 00:00. At 18:00 the product has reached the maximum available operating hours and is therefore parked in standby mode. The product starts cutting the grass again next day at 00:00. 24 h B period must in total be according to the Standby time table. Refer to Schedule and Standby on page 37. Timer setting Period 1 (A): 00:00-12:00 Timer setting Period 2 (C): 18:00-24:00 Active period (A): 00:00-12:00 Active period (C): 18:00-22:00 The product operates between 00:00 and 12:00. It starts again at 18:00 but stops at 22:00 due to standby mode until it starts again at 00:00. 24 h D A Standby Operation Operation Standby C B Standby ChaMrgoinwigng Operation ChaMroginwigng Example: A specified work area of 1000 m2 Operation, A + C = max. hours 18 Charging/Standby, B + D = min. hours 6 A Example: A specified work area of 1000 m2 Operation, A = max. hours 18 Charging/Standby, B = min. hours 6 4.7.2 Example 2 This example is applicable to products with a specified work area of 1000 m2, but the principle is the same for the other models. The timer settings can be divided into 2 work periods to prevent mowing when there usually is other activities ongoing. If the timer setting is divided into 2 work periods, the minimum standby 4.8 To charge the battery WARNING: Only charge the product using a charging station which is intended for it. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. In the event of leakage of electrolyte flush with water and seek medical help if it comes in contact with the eyes etc. When the product is new or has been stored for a long period, the battery can be empty and needs to be charged before starting. In the Main area mode, the product automatically alternates between mowing and charging. 38 - Operation 1440 - 002 - 19.02.2020

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Product overview Automower® 310/315/315X	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety information	10
IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE	10
Safety definitions	11
Safety instructions for operation	11
Use	11
Battery safety	12
How to lift and move the product	12
Maintenance	13
In the event of a thunderstorm	13
Installation	15
Introduction - Installation	15
Main components for installation	15
General preparations	15
Before the installation of the wires	15
To examine where to put the charging station	15
To examine where to put the power supply	16
To examine where to put the boundary wire	16
To put the boundary wire in a slope	18
Passages	18
To make an island	18
To make a secondary area	19
To examine where to put the guide wire	19
Work area examples	20
Installation of the product	20
Installation tools	20
To install the charging station	20
To install the boundary wire	21
To install the guide wire	22
To put the wire into position with stakes	22
To bury the boundary wire or the guide wire	23
To extend the boundary wire or the guide wire	23
After the installation of the product	23
To do a visual check of the charging station	23
To do the basic settings	23
Calibration	24
To do the product settings	24
Menu structure	24
To get access to the menu	24
Schedule	24
To set the schedule	24
To calculate the suitable operating hours	24
To copy the schedule setting	25
To reset the schedule setting	25
Security level	25
To set the security level	25
To create a New loop signal	25
To change the PIN-code	26
To change the length of the alarm	26
To change the length of the time lock	26
Messages	26
To read the messages	26
Weather timer	26
To set the Weather timer	26
To set the Weather timer frequency	27
Lawn Coverage	27
GPS Assisted Navigation	27
To set the GPS Assisted Navigation	27
To set the Lawn Coverage function	27
To do a test of the Lawn Coverage function	28
To measure the distance from the charging station	28
To disable or enable the Lawn Coverage function	28
To reset the Lawn Coverage settings	28
Methods for the product to find the charging station	28
To set how the product finds the charging station	29
To do a test of the guide wire	29
To do a test of the boundary wire	29
To change the signal range of the charging station	29
Corridor width	29
To set the corridor width	30
Exit angle	30
To set the exit angle	30
Reversing distance	30
To set the reversing distance	30
Drive Past Wire function	30
To set the Drive Past Wire function	30
Settings	30
Profiles	31
To save settings to a profile	31
To change the name of a profile	31
To use a profile	31
To connect a new charging station to a profile	31
ECO mode	31
To set the ECO mode	31
Spiral Cutting	31
To set the Spiral Cutting	31
To set the level of Spiral Cutting	32
Slope control	32
To set the Slope control	32
General	32
To set the time & date	32
To set the language	32
To set the Country & Timezone	32
To set the unit format	32
To reset all user settings	32
The About menu	32
Accessories	33
Information	33
Automower® Connect app	33
To install the Automower® Connect app	33
Automower® Connect@Home	33
To pair Connect@Home and the product	33
To remove paired accounts	33
Automower® Connect	33
To pair Automower® Connect and the product	33
To enable the GeoFence function	34
To set a new center point for the Geofence function	34
To set the GeoFence level of sensitivity	34
To use the SMS function	34
Network	34
APN settings	34
Headlights Automower® 315X	34
To set the schedule for the headlights	34
To set the Flashes when fault function	34
To avoid collisions with the mower house	35
Operation	36
Main switch	36
To start the product	36
Operating mode Start	36
Main area	36
Secondary area	36
Override schedule	37
Spot cutting	37
Operating mode Park	37
Park until further notice	37
Start again with next schedule	37
To stop the product	37
To switch off the product	37
Schedule and Standby	37
Example 1	38
Example 2	38
To charge the battery	38
Adjust the cutting height	39
To adjust the cutting height	39
Maintenance	40
Introduction - maintenance	40
Clean the product	40
Chassis and blade disc	40
Wheels	40
The body of the product	40
Charging station	40
Replace the blades	41
To replace the blades	41
Battery	41
Winter service	42
Troubleshooting	43
Introduction - troubleshooting	43
Fault messages	43
Information messages	48
Indicator lamp in the charging station	49
Symptoms	50
Find breaks in the loop wire	51
Transportation, storage and disposal	54
Transportation	54
Storage	54
Disposal	54
To remove the battery	54
Technical data	55
Technical data	55
Registered trademarks	57
Warranty	58
Warranty terms	58
EC Declaration of Conformity	59

Match case Limit results 1 per page

Product work capacity

Standby time, mini-

mum hours per day

Automower

310

Automower

315

Automower

315X

4.7.1 Example 1

This example is applicable to products with a

specified work area of 1000 m

, but the principle

is the same for the other models.

Schedule setting, Period 1: 00:00-24:00

Active period (A): 00:00-18:00

The schedule settings ensure that the product

begins cutting the lawn at 00:00. At 18:00 the

product has reached the maximum available

operating hours and is therefore parked in

standby mode. The product starts cutting the

grass again next day at 00:00.

24 h

Mowing

Charging

Standby

Operation

Example: A specified work area of 1000 m

Operation, A = max. hours

Charging/Standby, B = min. hours

4.7.2 Example 2

This example is applicable to products with a

specified work area of 1000 m

, but the principle

is the same for the other models.

The timer settings can be divided into 2 work

periods to prevent mowing when there usually is

other activities ongoing. If the timer setting is

divided into 2 work periods, the minimum standby

period must in total be according to the Standby

time table. Refer to

Schedule and Standby on

page 37

Timer setting Period 1 (A): 00:00-12:00

Timer setting Period 2 (C): 18:00-24:00

Active period (A): 00:00-12:00

Active period (C): 18:00-22:00

The product operates between 00:00 and 12:00.

It starts again at 18:00 but stops at 22:00 due to

standby mode until it starts again at 00:00.

Mowing

Charging

Standby

Operation

24 h

Example: A specified work area of 1000 m

Operation, A + C = max. hours

Charging/Standby, B + D = min. hours

4.8 To charge the battery

WARNING:

Only charge the product

using a charging station which is

intended for it. Incorrect use may result

in electric shock, overheating or

leakage of corrosive liquid from the

battery.

In the event of leakage of electrolyte

flush with water and seek medical help

if it comes in contact with the eyes etc.

When the product is new or has been stored for a

long period, the battery can be empty and needs

to be charged before starting. In the

Main area

mode, the product automatically alternates

between mowing and charging.

- Operation

1440 - 002 - 19.02.2020