Home » Husqvarna Manuals » Lawn Mowers » Husqvarna AUTOMOWER 315X with installation service » Manual Viewer

Husqvarna AUTOMOWER 315X with installation service Owner Manual - Page 5

Symbols on the product, Symbols on the display, Operator's Manual and Quick Guide

View all Husqvarna AUTOMOWER 315X with installation service manuals

Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

23. Loop wire for boundary loop and guide wire 1 24. Couplers for loop wire 2 25. Stakes3 26. Connector for the loop wire 4 27. Screws for securing the charging station 28. Measurement gauge for help when installing the boundary wire (the measurement gauge is broken loose from the box) 29. Operator's Manual and Quick Guide 30. Cable markers 31. Extra blades 32. Low voltage cable 33. Alarm decal 1.3 Symbols on the product These symbols can be found on the product. Study them carefully. WARNING: Read the user instructions before operating the product. WARNING: Disable the product before working on or lifting the product. WARNING: Keep a safe distance from the product when operating. Keep your hands and feet away from the rotating blades. WARNING: Do not ride on the product. Never put your hands or feet close to or under the product. Never use a high-pressure washer or even running water to clean the product. Use a detachable power supply as defined on the rating label next to the symbol. This product conforms to the applicable EC Directives. Noise emission to surroundings. The product's emissions are set out in Technical data on page 55 and on the rating plate. It is not permitted to dispose this product as normal household waste. Ensure that the product is recycled in accordance with local legal requirements. The chassis contains components which are sensitive to electrostatic discharge (ESD). The chassis must also be resealed in a professional manner. For these reasons the chassis shall only be opened by authorized service technicians. A broken seal can result in the entire or parts of the guarantee no longer being valid. The low voltage cable must not be shortened, extended or spliced. Do not use a trimmer nearby the low voltage cable. Be careful when trimming edges where the cables are placed. 1.4 Symbols on the display The schedule function controls when the product cuts the lawn. The security function lets the operator select between 3 security levels. 1 Is a part of the Installation kit which is purchased separately. 2 Refer to note 1 3 Refer to note 1 4 Refer to note 1 1440 - 002 - 19.02.2020 Introduction - 5

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Product overview Automower® 310/315/315X	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview - 1	7
Menu structure overview - 2	8
Display	9
Keypad	9
Safety	10
Safety information	10
IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE	10
Safety definitions	11
Safety instructions for operation	11
Use	11
Battery safety	12
How to lift and move the product	12
Maintenance	13
In the event of a thunderstorm	13
Installation	15
Introduction - Installation	15
Main components for installation	15
General preparations	15
Before the installation of the wires	15
To examine where to put the charging station	15
To examine where to put the power supply	16
To examine where to put the boundary wire	16
To put the boundary wire in a slope	18
Passages	18
To make an island	18
To make a secondary area	19
To examine where to put the guide wire	19
Work area examples	20
Installation of the product	20
Installation tools	20
To install the charging station	20
To install the boundary wire	21
To install the guide wire	22
To put the wire into position with stakes	22
To bury the boundary wire or the guide wire	23
To extend the boundary wire or the guide wire	23
After the installation of the product	23
To do a visual check of the charging station	23
To do the basic settings	23
Calibration	24
To do the product settings	24
Menu structure	24
To get access to the menu	24
Schedule	24
To set the schedule	24
To calculate the suitable operating hours	24
To copy the schedule setting	25
To reset the schedule setting	25
Security level	25
To set the security level	25
To create a New loop signal	25
To change the PIN-code	26
To change the length of the alarm	26
To change the length of the time lock	26
Messages	26
To read the messages	26
Weather timer	26
To set the Weather timer	26
To set the Weather timer frequency	27
Lawn Coverage	27
GPS Assisted Navigation	27
To set the GPS Assisted Navigation	27
To set the Lawn Coverage function	27
To do a test of the Lawn Coverage function	28
To measure the distance from the charging station	28
To disable or enable the Lawn Coverage function	28
To reset the Lawn Coverage settings	28
Methods for the product to find the charging station	28
To set how the product finds the charging station	29
To do a test of the guide wire	29
To do a test of the boundary wire	29
To change the signal range of the charging station	29
Corridor width	29
To set the corridor width	30
Exit angle	30
To set the exit angle	30
Reversing distance	30
To set the reversing distance	30
Drive Past Wire function	30
To set the Drive Past Wire function	30
Settings	30
Profiles	31
To save settings to a profile	31
To change the name of a profile	31
To use a profile	31
To connect a new charging station to a profile	31
ECO mode	31
To set the ECO mode	31
Spiral Cutting	31
To set the Spiral Cutting	31
To set the level of Spiral Cutting	32
Slope control	32
To set the Slope control	32
General	32
To set the time & date	32
To set the language	32
To set the Country & Timezone	32
To set the unit format	32
To reset all user settings	32
The About menu	32
Accessories	33
Information	33
Automower® Connect app	33
To install the Automower® Connect app	33
Automower® Connect@Home	33
To pair Connect@Home and the product	33
To remove paired accounts	33
Automower® Connect	33
To pair Automower® Connect and the product	33
To enable the GeoFence function	34
To set a new center point for the Geofence function	34
To set the GeoFence level of sensitivity	34
To use the SMS function	34
Network	34
APN settings	34
Headlights Automower® 315X	34
To set the schedule for the headlights	34
To set the Flashes when fault function	34
To avoid collisions with the mower house	35
Operation	36
Main switch	36
To start the product	36
Operating mode Start	36
Main area	36
Secondary area	36
Override schedule	37
Spot cutting	37
Operating mode Park	37
Park until further notice	37
Start again with next schedule	37
To stop the product	37
To switch off the product	37
Schedule and Standby	37
Example 1	38
Example 2	38
To charge the battery	38
Adjust the cutting height	39
To adjust the cutting height	39
Maintenance	40
Introduction - maintenance	40
Clean the product	40
Chassis and blade disc	40
Wheels	40
The body of the product	40
Charging station	40
Replace the blades	41
To replace the blades	41
Battery	41
Winter service	42
Troubleshooting	43
Introduction - troubleshooting	43
Fault messages	43
Information messages	48
Indicator lamp in the charging station	49
Symptoms	50
Find breaks in the loop wire	51
Transportation, storage and disposal	54
Transportation	54
Storage	54
Disposal	54
To remove the battery	54
Technical data	55
Technical data	55
Registered trademarks	57
Warranty	58
Warranty terms	58
EC Declaration of Conformity	59

Match case Limit results 1 per page

23.

Loop wire for boundary loop and guide wire

24.

Couplers for loop wire

25.

Stakes

26.

Connector for the loop wire

27.

Screws for securing the charging station

28.

Measurement gauge for help when installing

the boundary wire (the measurement gauge

is broken loose from the box)

29.

Operator’s Manual and Quick Guide

30.

Cable markers

31.

Extra blades

32.

Low voltage cable

33.

Alarm decal

1.3 Symbols on the product

These symbols can be found on the product.

Study them carefully.

WARNING:

Read the

user instructions before

operating the product.

WARNING:

Disable the

product before working on

or lifting the product.

WARNING:

Keep a safe

distance from the product

when operating. Keep

your hands and feet away

from the rotating blades.

WARNING:

Do not ride

on the product. Never put

your hands or feet close

to or under the product.

Never use a high-pres-

sure washer or even run-

ning water to clean the

product.

Use a detachable power

supply as defined on the

rating label next to the

symbol.

This product conforms to the

applicable EC Directives.

Noise emission to surroundings. The

product’s emissions are set out in

Technical data on page 55

and on the

rating plate.

It is not permitted to dispose this

product as normal household waste.

Ensure that the product is recycled in

accordance with local legal

requirements.

The chassis contains components

which are sensitive to electrostatic

discharge (ESD). The chassis must

also be resealed in a professional

manner. For these reasons the chassis

shall only be opened by authorized

service technicians. A broken seal can

result in the entire or parts of the

guarantee no longer being valid.

The low voltage cable must not be

shortened, extended or spliced.

Do not use a trimmer nearby the low

voltage cable. Be careful when

trimming edges where the cables are

placed.

1.4 Symbols on the display

The schedule function controls when

the product cuts the lawn.

The security function lets the operator

select between 3 security levels.

Is a part of the Installation kit which is purchased separately.

Refer to note 1

1440 - 002 - 19.02.2020

Introduction -