Husqvarna AUTOMOWER 430XH Self-Install Owner Manual - Page 22

Note:

Make a note of the PIN code. Refer to

Introduction on page 3

.

3.9.3 Calibration

The calibration process is automatic. After the basic

settings are done, the product moves away from the

charging station and stops, while it calibrates some of

the product settings. When the calibration is complete,

the product starts to mow.

3.10 Product settings

You can use the keypad and the display on the product

or the Automower

®

Connect app to do the settings for

the functions of the product. The functions of the product

have factory settings that are applicable for almost all

work areas, but the settings can be adapted to the

conditions for each work area.

3.11 Automower

®

Connect app

The product can connect to mobile devices that have

the Automower

®

Connect app installed. Automower

®

Connect is a free app for your mobile device. You

can use the extended functions for the product in the

Automower

®

Connect app.

•

The

Dashboard

shows the current operation of the

product. You can select an operating mode for the

product in the dashboard.

•

The

Map

shows the current position of the product

and the set center point for the GeoFence function.

•

In the

Settings

menu you can set the settings for

the product.

•

In the

Statistics

menu you can see the statistics of

the product.

•

In the

Messages

menu you can find the

Fault

messages

and the

Information messages

of the

product.

The Automower

®

Connect app has Long-range cellular

connectivity and Short-range Bluetooth

®

connectivity.

3.11.1 To install the Automower

®

Connect

app

1.

Download the Automower

®

Connect app on your

mobile device.

2.

Sign up for a Husqvarna account in the

Automower

®

Connect app.

3.

An e-mail is sent to the registered e-mail address.

Follow the instructions in the e-mail in less than 24

hours to validate your account.

4.

Log in to your Husqvarna account in the

Automower

®

Connect app.

3.11.2 To pair Automower

®

Connect and

the product

Bluetooth

®

communication and the Automower

®

Connect kit for cellular communication are included in

Automower

®

430XH/450XH.

1.

Do steps 1–3 in

To get access to the menu in the

display of the product on page 22

.

2.

Use the

arrow

buttons and the

OK

button to

move through the menu structure

Accessories

>

Automower

®

Connect

>

Pairing

>

New pairing

.

3.

Follow the instructions in the Automower

®

Connect

app.

3.12 Product settings with keypad and

display

3.12.1 To get access to the menu in the

display of the product

1.

Push the

STOP

button.

2.

Use the

number

buttons and the

OK

button to

enter the PIN code.

3.

Push the

MENU

button.

3.12.2 Menu structure

The main menu contains:

•

Schedule

•

Cutting height

•

Security

•

Messages

•

Weather timer

•

Installation

•

Settings

•

Accessories

Refer to

Menu structure overview 1 on page 7

,

Menu

structure overview 2 on page 8

and

Menu structure

overview 3 on page 9

.

22

- Installation

1230 - 004 - 04.03.2022

Section	Page
Contents	2
Introduction	3
Support	3
Product description	3
Mowing technique	3
Find the charging station	3
Automower® Connect	3
Automower® Connect	3
Product overview	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	6
General manual instructions	6
Menu structure overview 1	7
Menu structure overview 2	8
Menu structure overview 3	9
Display	10
Keypad	10
Safety	11
Safety definitions	11
General safety instructions	11
Safety instructions for installation	12
Safety instructions for operation	12
Safety instructions for maintenance	12
Battery safety	12
How to lift and move the product	13
Installation	14
Introduction - Installation	14
Main components for installation	14
General preparations	14
Before the installation of the wires	14
To examine where to put the charging station	14
To examine where to put the power supply	15
To examine where to put the boundary wire	15
To put the boundary wire in a slope	16
Passages	17
To make an island	17
To make a secondary area	17
To examine where to put the guide wire	18
Work area examples	18
Installation of the product	19
Installation tools	19
To install the charging station	19
To install the boundary wire	19
To install the guide wire	20
To put the wire into position with stakes	20
To bury the boundary wire or the guide wire	21
To extend the boundary wire or the guide wire	21
After the installation of the product	21
To do a visual check of the charging station	21
To do the basic settings	21
Calibration	22
Product settings	22
Automower® Connect app	22
To install the Automower® Connect app	22
To pair Automower® Connect and the product	22
Product settings with keypad and display	22
To get access to the menu in the display of the product	22
Menu structure	22
Schedule	23
To set the schedule	23
To calculate the suitable operating hours	23
To copy the schedule setting	23
To reset the schedule setting	23
Cutting height	23
Adjust the cutting height	24
To set the cutting height	24
TargetHeight	24
To set the TargetHeight	24
Security level	24
To set the security level	24
To create a New loop signal	24
To change the PIN-code	24
To change the duration of the alarm	24
To change the duration of the time lock	25
Messages	25
To read the messages	25
Weather timer	25
To set the Weather timer	25
To set the Weather timer frequency	25
Settings	25
Profiles	26
To save settings to a profile	26
To change the name of a profile	26
To use a profile	26
To connect a new charging station to a profile	26
ECO mode	26
To set the ECO mode	26
Spiral Cutting	26
To set the Spiral Cutting	26
To set the level of Spiral Cutting	26
Slope control	27
To set the Slope control	27
General	27
To set the time & date	27
To set the language	27
To set the Country & Timezone	27
To set the unit format	27
To reset all user settings	27
The About menu	27
Installation	27
Lawn Coverage	27
GPS Assisted Navigation	28
To set the GPS Assisted Navigation	28
To set the Lawn Coverage function	28
To do a test of the Lawn Coverage function	28
To measure the distance from the charging station	28
To disable or enable the Lawn Coverage function	28
To reset the Lawn Coverage settings	28
Methods for the product to find the charging station	29
To set how the product finds the charging station	29
To do a test of the guide wire	29
To do a test of the boundary wire	29
To change the signal range of the charging station	29
Corridor width	30
To set the corridor width	30
Exit angle	30
To set the exit angle	30
Reversing distance	30
To set the reversing distance	30
Drive Past Wire function	30
To set the Drive Past Wire function	30
Accessories	30
Information	30
Automower® Connect	30
To enable the GeoFence function	31
To set a new center point for the Geofence function	31
To set the GeoFence level of sensitivity	31
To use the SMS function	31
Network	31
APN settings	31
Ultrasonic Automower® 450XH	31
To set the Ultrasonic function	31
Headlights	31
To set the schedule for the headlights	31
To set the Flashes when fault function	31
To avoid collisions with the Automower® house	32
FlexiFence	32
To enable the Zone generator function	32
Operation	33
Main switch	33
To start the product	33
Operating modes - Start	33
Main area	33
Secondary area	33
Override schedule	33
Spot cutting	34
To park the product	34
Operating modes - Park	34
Park until further notice	34
Start again with next schedule	34
To stop the product	34
To switch off the product	34
To charge the battery	34
Maintenance	35
Introduction - maintenance	35
Clean the product	35
Chassis and blade disc	35
To clean the wheels	35
To clean the body of the product	35
To clean the charging station	35
Replacement of the blades	36
To replace the blades	36
Battery	36
Winter service	36
Troubleshooting	37
Introduction - troubleshooting	37
Fault messages	37
Information messages	42
Indicator lamp in the charging station	44
Symptoms	45
Find breaks in the loop wire	46
Transportation, storage and disposal	49
Transportation	49
Storage	49
Disposal	49
To remove the battery	49
Technical data	50
Technical data	50
Registered trademarks	52
Warranty	53

Husqvarna AUTOMOWER 430XH Self-Install Owner Manual - Page 22

Product settings, 11 Automower, Connect app, 12 Product settings with keypad and, display

Page 22 highlights