Husqvarna AUTOMOWER 550 EPOS Owner Manual - Page 32

Message Cause Action Reference station communi- The product is not paired with the refer- Redo the pairing with the reference sta- cation problem ence station. tion. The reference station is not installed cor- Examine the installation of the reference rectly. station. Refer to the Operator's manual for the Reference station. The reference station radio signal does not cover the compete area. Test if the product has radio signal from the reference station in the complete area. If not, redo the installation of the reference station or the installation of the map. Refer to Installation of the map on page 17. Power failure. Find and rectify the cause for power failure for the reference station. There is an error in the reference station and the LED status indicator is flashing red. Disconnect the power to the reference station and connect it again to restart the reference station. If the problem stays, speak to your approved servicing dealer. Unexpected cutting height adj The cutting height adjustment cannot move. Limited cutting height range Cutting height problem Examine the cutting height adjustment and remove grass or other objects. If the problem stays, speak to your approved servicing dealer. Cutting height blocked Cutting system major imbalance The product has discovered vibrations in the cutting disc. Continued operation can cause damage to the cutting system. Make sure that the blades and screws are not damaged and not worn. Make sure that all blades are correctly attached. Make sure that there is only one blade attached on each position in the blade disc. 32 - Troubleshooting 1576 - 003 - 30.12.2020