Husqvarna AUTOMOWER 550 EPOS Owner Manual - Page 34

6.4 LED indicator lamp on the charging station For a fully functional installation, the indicator lamp in the charging station must show a solid or flashing green light. If another color shows, follow the troubleshooting guide below. There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna representative. Light Status Green solid light Good signals. Green flashing light The signals are good and ECO mode is activated. Refer to ECO mode on page 21. Red flashing light Interruption in the charging station's antenna. Speak to your local Husqvarna representative. Red solid light Fault in the circuit board or incorrect power supply in the charging station. The fault must be correct by an authorized service technician. Speak to your local Husqvarna representative. 6.5 LED indicator lamp on the product The LED indicator lamp on top of the product shows the current status: Light Status Green solid light The product is mowing the lawn or leaving the charging station. Green flashing light The product is paused. Red flashing light The product has stopped due to an error. Yellow solid light The STOP button has been pushed. Yellow flashing light The product requests the PIN code. Blue solid light The product is on its way to the charging station or a point of interest. An app is connected to the product with Bluetooth®, the blue solid light is lit for 3 seconds. Blue pulsating light The product is charging in the charging station. Blue flashing light The product is parked in charging station. The product can at this time find the Bluetooth® to connect with. White solid light The product is in appDrive mode. White pulsating light The product switching off. Firmware installation is ongoing. White flashing light The firmware must be updated. There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna representative. 34 - Troubleshooting 1576 - 003 - 30.12.2020