Husqvarna RZ5424 Kawasaki Owners Manual - Page 41
Cutting Blades, Blade replacement, with gloves and/or wrap blades with
View all Husqvarna RZ5424 Kawasaki manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
MAINTENANCE Cutting Blades For the best moving results, it is important that blades are well sharpened and not damaged. Replace blades that have been bent or cracked by hitting obstacles. Let the service workshop decide whether a blade with large nicks can be repaired/ground or must be replaced. Balance the blades after sharpening. Check the blade mounts. WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. The sharpening of blades should be carried out by an authorized service workshop. Blade replacement 1. Remove blade bolt by turning counterclockwise. 2. Install new or resharpened blade with stamped GRASS SIDE facing towards ground/grass (down) or THIS SIDE UP facing deck and spindle housing. 2 1 3. Seat the blade's opening firmly onto the spindle housing. 1. Blade 2. Blade bolt (special) 4. Tighten blade bolt securely. 5. Torque blade bolt to 40-55 ft/lbs (54-75 Nm). 3. Spindle housing Blade attachment 3 8058-129 IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. 41