Husqvarna RZ5424 Kawasaki Owners Manual - Page 43
Anti-scalp rollers, flat level surface.
View all Husqvarna RZ5424 Kawasaki manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
MAINTENANCE Anti-scalp rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Antiscalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower on a flat level surface. Anti-scalp rollers can be set in three positions: • Upper position 1½ to 3" (38 to 76 mm) grass. • Middle position 3" to 4½" (76 to 114 mm) grass. • Lower position 4½" to 6" (114 to 152 mm) grass. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck. Anti-scalp rollers IMPORTANT INFORMATION To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck. 8058-054 43