Husqvarna T525 Owner Manual - Page 18
Maintenance and checks of the safety, devices on the product
View all Husqvarna T525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Daily maintenance Weekly maintenance Make sure that these are no fuel leaks from the engine, tank or fuel lines. Make sure that the saw chain does not rotate when the engine is at idle speed. Make sure that the muffler is correctly attached, has no damages and that no parts of the muffler are missing. Monthly maintenance Maintenance and checks of the safety devices on the product To do a check of the brake band 1. Use a brush to remove wood dust, resin and dirt from the chain brake and clutch drum. Dirt and wear can decrease the function of the brake. 2. Hold the product tightly. 2. Do a check of the brake band. The brake band must be at a minimum of 0.6 mm/0.024 in thick at its thinnest point. To do a check of the front hand guard 1. Make sure that the front hand guard is not damaged and that there are no defects, such as cracks. 2. Make sure that the front hand guard moves freely and that it is attached safely to the clutch cover. WARNING: Make sure that the saw chain does not touch the ground or other objects. 3. Apply full throttle and tilt your left wrist against the front hand guard to engage the chain brake. The saw chain must stop immediately. WARNING: Do not let go of the front handle when you engage the chain brake. To do a check of the chain brake 1. Start the product. Refer to To start the product on page 12 for instructions. WARNING: Make sure that the saw chain does not touch the ground or other objects. 18 732 - 017 - 11.10.2019