IBM 172319X Installation Guide - Page 19
Important
UPC - 883436045230
View all IBM 172319X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
10. Secure the keyboard-and-mouse cable to the console unit with the nut and clamp: a. Unscrew the nut and remove the clamp. Note: In the following illustration, the console unit is turned over and is placed on a table or other flat surface. b. Push the keyboard-and-mouse cable into the clamp. Important: Make sure that you place the clamp on the keyboard-and-mouse cable approximately 70 - 76 mm (2.75 3 in.) from where the cable exits the keyboard. This prevents the cable from hanging below the bottom of the console unit. c. Place the clamp on the screw on the console unit frame and hand-tighten the nut on top of the clamp. 11. Turn over the console unit: a. Grasp the cable-management arm and the loose cables in one hand. b. On the opposite end of the console unit, grasp the flat-panel display and the console unit frame together with the other hand. c. Carefully turn over the console unit. 12. Route the keyboard-and-mouse cable through the cable management arm in the extended position to avoid strain on the cables. Secure the cable with the hook-and-loop fasteners. Chapter 2. Installing the console unit in the rack cabinet 9