IBM 172319X Installation Guide - Page 45
Replacing, slide-rail, assemblies
![]() |
UPC - 883436045230
View all IBM 172319X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
8. Attach the cable-management arm to the outer slide-rail bracket, using the screw that you removed in step 3 on page 33. 9. If you removed a console switch from behind the console unit, reinstall it now. 10. Reconnect the keyboard, mouse, and video connectors to the server or console switch. 11. Connect power to the display. Replacing the slide-rail assemblies Note: To make sure that the slide-rail assemblies fit correctly, replace both the outer and inner slide rails at the same time. To replace the outer and inner slide-rails for the console unit, complete the following steps: 1. Turn off the display and disconnect the power from the display. 2. Disconnect the keyboard, video, and mouse connectors from the server or console switch. 3. If a console switch is installed in the rear of the rack cabinet, remove the console switch from the rack. Chapter 4. Hardware maintenance information 35
![](/manual_guide/products/ibm-17231rx-installation-guide-c9f8044/45.png)