IBM 172319X Installation Guide - Page 27
keyboard-and-mouse
UPC - 883436045230
View all IBM 172319X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To install a console switch behind the console unit, complete the following steps. Note: In this procedure, left and right refer to orientations as you are facing the rear of the rack. 1. Attach the mounting bracket with channel to the left side of the console switch, using two 8-32 screws, and then attach the other mounting bracket to the right side of the console switch. Note: The mounting bracket that you attach to the left side of the console switch has a channel through which you can route the power, video, and keyboard-and-mouse cables. Make sure that you attach the bracket to the console switch so that the channel on the mounting bracket faces upward. 2. Install the console switch behind the console unit, using two screws from the miscellaneous hardware kit. Chapter 2. Installing the console unit in the rack cabinet 17