IBM 436854u Service Guide - Page 144
Hardware Info, BMC log, F2 for Diagnostics
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
For information about using the diagnostic programs, see "Running the diagnostic programs" on page 156. To view the BMC system-event log that is generated by the mini-BMC controller from the diagnostic programs, complete the following steps: 1. If the server is running, turn off the server and all attached devices. 2. Turn on all attached devices; then, turn on the server. 3. When the prompt F2 for Diagnostics is displayed, press F2. If you have set both a power-on password and an administrator password, you must type the administrator password to run the diagnostic programs. 4. From the top of the screen, select Hardware Info. 5. From the list, select BMC log. 126 System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide