IBM 4800-741 Hardware Service Guide - Page 87
Routing, cables
![]() |
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Updated July 14, 2008 Figure 60. Attaching the cable guide arm assembly 6. See Figure 60. Align the holes on the cable guide arm assembly with the pegs on the 4800 unit. Insert the top peg first and then slightly squeeze the unit to insert the bottom peg. 7. Complete the steps described in "Routing the cables." Routing the cables Important Ensuring that the cables are neatly routed reduces entanglements and saves space. For ease of installation, IBM recommends that you route the cables in the following order: 1. Power cord 2. Ethernet 3. Cash drawer and other peripheral devices (mouse, keyboard, printer) Follow these instructions to route the cables: 1. Complete the instructions described in "Removing the cable guide" on page 66. 2. Open all of the velcro strips on the cable guide and the cable guide assembly arm. Chapter 2. Removal and replacement procedures 69
![](/manual_guide/products/ibm-4800741-hardware-service-guide-41984db/87.png)