IBM 4800-741 Hardware Service Guide - Page 88
routing, mouse, keyboard, printer, cables
View all IBM 4800-741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Updated July 14, 2008 3. For each cable, insert the connector end into the system unit first, then route it through the cable guide. You can close the velcro loop around the cord at this time or later in the cable routing process. Figure 61. Extra cord length during routing Tip for routing the mouse, keyboard, and printer cables When routing these cables, allow extra length at the connector end by forming a loop (see Figure 61) before continuing with the cable into the cable guide. This extra length prevents undue strain on the connector. 4. With the cable guide arm assembly perpendicular to the system unit, continue to route the cable along the outside of the cable guide arm assembly, closing the velcro strips where appropriate to secure. Note: Do not plug the power cord into the receptacle at this time, or attach the cables to the devices. 70 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide