IBM 79717au User Guide - Page 33
Removing, expansion
UPC - 883436004305
View all IBM 79717au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Removing an expansion unit The following illustration shows how to remove the MPE unit from a double-width type blade server. Note: The following illustration shows how to remove an MPE from the blade server; removing another type of expansion unit from a blade server is similar. Extraction thumbscrew Expansion unit Blade expansion connector cover Blade-cover release MPE unit connector cover Blade-cover release To remove an expansion unit, complete the following steps: 1. Read the safety information beginning on page v and "Installation guidelines" on page 17. 2. Open the blade server cover (see "Opening the blade server cover" on page 20 for instructions). 3. If the expansion unit has an extraction device (such as a thumbscrew or a lever), use it to disengage the expansion unit from the blade server; otherwise, press the blade-cover release on each side of the blade server to disengage the expansion unit from the blade server. 4. Rotate the expansion unit open; then, lift the expansion unit from the blade server. Note: Do not rotate the expansion unit open to more than a 90 degree angle from the blade server. Chapter 3. Installing options 21