IBM 8835 Installation Guide - Page 35
Installing a memory module, The server supports 512 MB and 1 GB DIMMs. See the ServerProven
UPC - 000435158314
View all IBM 8835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing a memory module The following notes describe the types of dual inline memory modules (DIMMs) that your server supports and other information that you must consider when installing DIMMs: v Your server uses interleaved dual inline memory modules (DIMMs), which you must add, remove, or replace in pairs. Each pair must be of the same type, capacity, and speed. The server comes with one pair of DIMMs installed in DIMM slots 1 and 2 on the system board. v You can increase the amount of memory in the server through one of the following methods: - Replacing the installed DIMMs with higher-capacity DIMMs - Installing an additional pair of DIMMs in slots 3 and 4 for a single microprocessor configuration - Installing an additional pair of DIMMs in slots 5 and 6 for a dual-microprocessor configuration Note: For optimal dual-microprocessor performance, install DIMMs in slots 1, 2, 5, and 6. v The server supports 512 MB and 1 GB DIMMs. See the ServerProven® list at http://www.ibm.com/pc/us/compat/ for a list of memory modules that are supported by the server. The following illustration shows the memory slots on the system board. DIMM 4 (DDR4) DIMM 3 (DDR3) DIMM 2 (DDR2) DIMM 1 (DDR1) DIMM 6 (DDR6) DIMM 5 (DDR5) Chapter 2. Installing options 21