IBM 8835 Installation Guide - Page 44
Airflow, Install the replacement fan in the location from which you removed the failed
 |
UPC - 000435158314
View all IBM 8835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5. Remove the fan from the server: a. Disconnect the fan cable from the system board. b. Lift the fan out of the server. Fan 5 Fan 4 Fan 3 Fan 2 Airflow Fan 1 6. Position the replacement fan so that the airflow arrow on the side of the fan is pointing toward the rear of the server. Note: Correct airflow is from the front to the rear of the server. 7. Install the replacement fan in the location from which you removed the failed fan. Press the replacement fan into the fan connector until the fan snaps into place. 8. Connect the replacement fan cable to the system board. 9. Continue with "Completing the installation" on page 31. 30 IBM 325 Type 8835: Option Installation Guide Eserver
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39 -
40 -
41 -
42 -
43 -
44 -
45 -
46 -
47 -
48 -
49 -
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
5.
Remove the fan from the server:
a.
Disconnect the fan cable from the system board.
b.
Lift the fan out of the server.
Airflow
Fan 5
Fan 4
Fan 3
Fan 2
Fan 1
6.
Position the replacement fan so that the airflow arrow on the side of the fan is
pointing toward the rear of the server.
Note:
Correct airflow is from the front to the rear of the server.
7.
Install the replacement fan in the location from which you removed the failed
fan. Press the replacement fan into the fan connector until the fan snaps into
place.
8.
Connect the replacement fan cable to the system board.
9.
Continue with “Completing the installation” on page 31.
30
IBM
Eserver
325 Type 8835: Option Installation Guide