IBM 884872U User Guide - Page 17

Integrated - computers

Page 17 highlights

Table 1. Features and specifications Microprocessor: v AMD Opteron™ processor v 1024 KB Level-2 cache Note: Use the Configuration/Setup Utility program to determine the type and speed of the microprocessors in your server. Memory: v Type: Error correcting code (ECC), double-data rate (DDR) SDRAM, registered DIMMs with Chipkill™ memory protection - Minimum: 1 GB - Maximum: 16 GB Video controller: v ATI RageXL video controller on system board v Compatible with SVGA v 8 MB SDRAM video memory Power supply: One 411 watt (115-230 V ac) Size: v Height: 43 mm (1.69 in.) v Depth: 660 mm (25.98 in.) v Width: 440 mm (17.32 in.) v Weight: approximately 12.7 kg (28 lb) when fully configured Heat output: Approximate heat output in British thermal units (Btu) per hour for dual multiprocessor configurations: v Minimum configuration: 409 Btu (120 watts) v Maximum configuration: 1366 Btu (400 watts) Electrical input: v Sine-wave input (50-60 Hz) required v Input voltage low range: - Minimum: 100 V ac - Maximum: 127 V ac v Four interleaved slots with standard microprocessor (DIMM installation required in pairs) v Four additional interleaved slots with optional microprocessor (DIMM installation required in pairs) Drives: v CD-ROM: Slim IDE (standard) v Hard disk drives: - Slim-high 3.5-inch drives, hot-swap SCSI or non-hot-swap Serial ATA (SATA) (drive capacity and speed vary with model) - Maximum: Two Expansion slots: v Two, used in either of the following jumper-controlled configurations: - 100 MHz/64-bit PCI-X -- One full-length and one half-length adapter slot supporting up to 100 MHz/64-bit PCI-X adapters - 133 MHz/64-bit PCI-X (the default) -- One full-length adapter slot supporting one 133 MHz/64-bit PCI-X adapter (half-length slot is not available for use) Integrated functions: v Baseboard management controller v One single-channel LSI Ultra320 SCSI controller v Two Broadcom 10/100/1000 Ethernet controllers (dual-port design) with Wake on LAN® support v Four Universal Serial Bus (USB) ports v One serial port v One video port Note: The baseboard management controller is also known as the service processor. Acoustical noise emissions: v Declared sound power, idling: 6.5 bels v Declared sound power, operating: 6.5 bels Environment: v Air temperature: - Server on: 10° to 35°C (50.0° to 95.0°F). Altitude: 0 to 914 m (2998.7 ft) - Server on: 10° to 32°C (50.0° to 89.6°F). Altitude: 914 m (2998.7 ft) to 2133 m (6998.0 ft) - Server off: 10° to 43°C (50.0° to 109.4°F). Maximum altitude: 2133 m (6998.0 ft) v Input voltage high range: - Minimum: 200 V ac - Maximum: 240 V ac v Input kilovolt-amperes (kVA), approximately: - Minimum: 0.120 kVA - Maximum: 0.400 kVA Notes: 1. Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use. 2. These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. v Supports 3.3 V or universal adapters only v On PCI bus 3 v Humidity: - Server on: 8% to 80% - Server off: 8% to 80% v Airflow rates: - Minimum: 28 CFM - Maximum: 47 CFM Chapter 1. Introducing the 326 Type 8848 server 3 Eserver

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Table
1.
Features
and
specifications
Microprocessor:
v
AMD
Opteron
processor
v
1024
KB
Level-2
cache
Note:
Use
the
Configuration/Setup
Utility
program
to
determine
the
type
and
speed
of
the
microprocessors
in
your
server.
Memory:
v
Type:
Error
correcting
code
(ECC),
double-data
rate
(DDR)
SDRAM,
registered
DIMMs
with
Chipkill
memory
protection
Minimum:
1
GB
Maximum:
16
GB
v
Four
interleaved
slots
with
standard
microprocessor
(DIMM
installation
required
in
pairs)
v
Four
additional
interleaved
slots
with
optional
microprocessor
(DIMM
installation
required
in
pairs)
Drives:
v
CD-ROM:
Slim
IDE
(standard)
v
Hard
disk
drives:
Slim-high
3.5-inch
drives,
hot-swap
SCSI
or
non-hot-swap
Serial
ATA
(SATA)
(drive
capacity
and
speed
vary
with
model)
Maximum:
Two
Expansion
slots:
v
Two,
used
in
either
of
the
following
jumper-controlled
configurations:
100
MHz/64-bit
PCI-X
--
One
full-length
and
one
half-length
adapter
slot
supporting
up
to
100
MHz/64-bit
PCI-X
adapters
133
MHz/64-bit
PCI-X
(the
default)
--
One
full-length
adapter
slot
supporting
one
133
MHz/64-bit
PCI-X
adapter
(half-length
slot
is
not
available
for
use)
v
Supports
3.3
V
or
universal
adapters
only
v
On
PCI
bus
3
Video
controller:
v
ATI
RageXL
video
controller
on
system
board
v
Compatible
with
SVGA
v
8
MB
SDRAM
video
memory
Power
supply:
One
411
watt
(115-230
V
ac)
Size:
v
Height:
43
mm
(1.69
in.)
v
Depth:
660
mm
(25.98
in.)
v
Width:
440
mm
(17.32
in.)
v
Weight:
approximately
12.7
kg
(28
lb)
when
fully
configured
Integrated
functions:
v
Baseboard
management
controller
v
One
single-channel
LSI
Ultra320
SCSI
controller
v
Two
Broadcom
10/100/1000
Ethernet
controllers
(dual-port
design)
with
Wake
on
LAN
®
support
v
Four
Universal
Serial
Bus
(USB)
ports
v
One
serial
port
v
One
video
port
Note:
The
baseboard
management
controller
is
also
known
as
the
service
processor.
Acoustical
noise
emissions:
v
Declared
sound
power,
idling:
6.5
bels
v
Declared
sound
power,
operating:
6.5
bels
Environment:
v
Air
temperature:
Server
on:
10
°
to
35°C
(50.0°
to
95.0°F).
Altitude:
0
to
914
m
(2998.7
ft)
Server
on:
10°
to
32°C
(50.0°
to
89.6°F).
Altitude:
914
m
(2998.7
ft)
to
2133
m
(6998.0
ft)
Server
off:
10°
to
43°C
(50.0°
to
109.4°F).
Maximum
altitude:
2133
m
(6998.0
ft)
v
Humidity:
Server
on:
8%
to
80%
Server
off:
8%
to
80%
v
Airflow
rates:
Minimum:
28
CFM
Maximum:
47
CFM
Heat
output:
Approximate
heat
output
in
British
thermal
units
(Btu)
per
hour
for
dual
multiprocessor
configurations:
v
Minimum
configuration:
409
Btu
(120
watts)
v
Maximum
configuration:
1366
Btu
(400
watts)
Electrical
input:
v
Sine-wave
input
(50-60
Hz)
required
v
Input
voltage
low
range:
Minimum:
100
V
ac
Maximum:
127
V
ac
v
Input
voltage
high
range:
Minimum:
200
V
ac
Maximum:
240
V
ac
v
Input
kilovolt-amperes
(kVA),
approximately:
Minimum:
0.120
kVA
Maximum:
0.400
kVA
Notes:
1.
Power
consumption
and
heat
output
vary
depending
on
the
number
and
type
of
optional
features
installed
and
the
power-management
optional
features
in
use.
2.
These
levels
were
measured
in
controlled
acoustical
environments
according
to
the
procedures
specified
by
the
American
National
Standards
Institute
(ANSI)
S12.10
and
ISO
7779
and
are
reported
in
accordance
with
ISO
9296.
Actual
sound-pressure
levels
in
a
given
location
might
exceed
the
average
values
stated
because
of
room
reflections
and
other
nearby
noise
sources.
The
declared
sound-power
levels
indicate
an
upper
limit,
below
which
a
large
number
of
computers
will
operate.
Chapter
1.
Introducing
the
Eserver
326
Type
8848
server
3