IBM 884872U User Guide - Page 38
LanCfg, Address, Alert, Security, Reboot
UPC - 000435494092
View all IBM 884872U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Note: You must run the LAN configuration utility (lancfg.exe) in a DOS command-line session after you start the server from the startable baseboard management controller firmware update diskette. Do not run the utility from a DOS window. 1. After the baseboard management controller firmware update is completed, a command prompt is displayed. Type lancfg and press Enter. The LAN configuration utility starts, and the BMC Information screen is displayed. The default values that are displayed are read-only. You cannot make changes in this screen. To use the LAN configuration utility, press F10 and use the arrow keys to select the menu items at the top of the window. 2. Select LanCfg. The LAN Configuration screen is displayed. Type the values for the baseboard management controller in the fields and select OK. Note: The Host MAC Address field is read-only and cannot be changed from the LAN configuration utility. 3. Select Alert. The Alert Setting screen is displayed. Type the applicable values for the server in the fields and select OK. Note: In the IP Address field, type the IP address of the workstation to which the baseboard management controller will forward alerts. 4. Select Security. The Security Setting screen is displayed. You can maintain the four baseboard management controller user accounts on this screen. To make changes on this screen, select Edit, type your changes in the Edit screen, and select OK. 5. After you make all the changes and before you exit the LAN configuration utility, remove the firmware update diskette from the diskette drive. 6. Select Exit. When you are prompted to restart the server, select Reboot. 24 326 Type 8848: User's Guide