IBM 884872U User Guide - Page 37
Configuring, baseboard, management, controller, connection
UPC - 000435494092
View all IBM 884872U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Note: To ensure proper server operation, be sure to update the server baseboard management controller firmware code first before updating the BIOS code. For more information, see "Updating the BIOS code" on page 17. Important: Before you continue with the following instructions, make sure that you have an external USB diskette drive attached to the server. You will need this device to complete these tasks. Complete the following steps to download the latest baseboard management controller firmware update: 1. Go to http://www.ibm.com/pc/support/. 2. In the Download section, click Downloads and drivers. 3. On the "Downloads and drivers" page, in the Brand field, select Servers. 4. In the Family field, select eServer 326; then, click Continue. 5. On the "eServer 326 support" page, select the baseboard management controller firmware update diskette. 6. Create a firmware update diskette from the image file. Note: If the Linux or Microsoft Windows operating-system update package is available from the World Wide Web and you have obtained the applicable update package, follow the instructions that come with the update package. To update the firmware, use one of the following methods: v If the Linux or Windows operating-system update package is available from the World Wide Web and you have obtained the applicable update package, follow the instructions that come with the update package. v If you are using a diskette, complete the following steps: 1. Turn off the server. 2. Insert the Firmware Update Diskette into an external USB diskette drive that you have attached to the server. 3. Turn on the server. If the server does not start from the external USB diskette drive, use the Configuration/Setup Utility program to configure the external USB diskette drive as a startup device. (See "Using the Configuration/Setup Utility program" on page 11.) Then, start again at step 1 of this procedure. 4. From a command-line prompt, type update.bat and press Enter. If there is an error in updating the firmware, try the update again. Configuring the baseboard management controller LAN connection To configure the baseboard management controller local area network (LAN) connection options for the server, use the LAN configuration utility (lancfg.exe). This utility is on the baseboard management controller firmware update diskette. You can start the LAN configuration utility after you update the baseboard management controller firmware. See "Using the baseboard management controller firmware update program" on page 22 for instructions for downloading and updating the baseboard management controller firmware. Complete the following steps to configure the baseboard management controller LAN connection by using the LAN configuration utility. Chapter 2. Configuring the server 23