IBM 9511HG2 User Guide - Page 21

U65C`tfuvq/cbdlvq/gn Qbhf 33 Xfeoftebz- Kvmz 23- 3111 5;1: QN Power Management If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have re-configured the computer, preferably to 1024 x 768 at 60Hz. To benefit from power management, the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association (VESA) Display Power Management Signalling (DPMS) Standard. The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. As an ENERGY STAR® Partner, IBM has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. IBM recommends that you switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. State Power Indicator Screen Restoring Operation Compliance On Steady green Normal DPMS Standby DPMS Suspend DPMS Off Steady amber Flashing amber (0.5 sec. interval) Flashing amber (1 sec. interval) Blank Blank Blank Press a key or move the mouse. ENERGY STAR® and NUTEK Press a key or ENERGY STAR® move the mouse. ‡ and NUTEK Press a key or ENERGY STAR® move the mouse. ‡ and NUTEK ‡ There may be a slight delay before the picture reappears. Product Disposal The fluorescent lamp in the liquid crystal display contains mercury. Dispose of it as required by local ordinances and regulations. 22