IBM HS21 User Guide - Page 30
Opening, blade, server, cover - server blade
![]() |
UPC - 000435947550
View all IBM HS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Opening the blade server cover Note: If the blade server has an expansion unit installed in place of the cover, remove it (see "Removing an expansion unit" on page 19). The following illustration shows how to open the cover on a blade server. Blade-cover release Blade-cover release To open the blade server cover, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 15. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 17 for instructions). 3. Carefully lay the blade server on a flat, static-protective surface, with the cover side up. 4. Press the blade-cover release on each side of the blade server or expansion unit and lift the cover open, as shown in the illustration. 5. Lay the cover flat, or lift it from the blade server and store for future use. Statement 21: CAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. 18 BladeCenter HS21 Type 8853: Installation and User's Guide
![](/manual_guide/products/ibm-hs21-user-guide-2e832b6/30.png)