IBM HS21 User Guide - Page 35
connectors, Group
UPC - 000435947550
View all IBM HS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
v If the blade server does not have a Memory and I/O Expansion Blade, when you install memory, you must install a pair of matched DIMMs. Install the DIMMs in the following order: Table 1. Caption. Description Pair First Second DIMM connectors 1 (J141) and 3 (J143) 2 (J142) and 4 (J144) v To set up a non-mirrored memory configuration in a blade server with a Memory and I/O Expansion Blade, when you install memory, you must install a pair of matched DIMMs. Install the DIMMs in the following order: Table 2. Caption. Description Pair First Second Third Fourth DIMM connectors 1 (system board J141) and 3 (system board J143) 5 (Memory and I/O Expansion Blade J18) and 7 (Memory and I/O Expansion Blade J20) 2 (system board J142) and 4 (system board J144) 6 (Memory and I/O Expansion Blade J19) and 8 (Memory and I/O Expansion Blade J21) v To set up a mirrored memory configuration in a blade server with a Memory and I/O Expansion Blade, when you install memory, you must install matched DIMMs in groups of four. Install the DIMMs in the following order: Table 3. Caption. Description Group First Second DIMM connectors 1 (system board J141) and 3 (system board J143) 5 (Memory and I/O Expansion Blade J18) and 7 (Memory and I/O Expansion Blade ( J20) 2 (system board J142) and 4 (system board J144) 6 (Memory and I/O Expansion Blade J19) and 8 (Memory and I/O Expansion Blade J21) v All DIMMs in a pair or group must be the same size, speed, type, technology, and physical design. You can mix compatible DIMMs from different manufacturers. v All DIMMs must have the same speed. However, different pairs or groups of DIMMs do not have to be of the same size, type, technology, and physical design. v If you want to take advantage of Chipkill memory, each DIMM in the blade server must support the Chipkill technology. Chapter 3. Installing options 23