IBM IC25N020ATDA04 Hard Drive Specifications - Page 180
ADDRESS command, is preserved by POR and HARD RESET. When B = 0, SET MAX SET PASSWORD
View all IBM IC25N020ATDA04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Output Parameters To The Device Feature Destination code for this command 01h SET MAX SET PASSWORD 02h SET MAX LOCK 03h SET MAX UNLOCK 04h SET MAX FREEZE LOCK When the Set Max ADDRESS command is executed, this register is ignored. B This indicates the option bit for selection whether nonvolatile or volatile. B = 0 is the volatile condition. When B = 1, MAX LBA/CYL, which is set by the Set Max ADDRESS command, is preserved by POR and HARD RESET. When B = 0, MAX LBA/CYL, which is set by Set Max ADDRESS command, will be lost by POR and HARD RESET. B = 1 is not valid when the device is in Address Offset mode and the command is aborted. Sector NumberIn LBA mode this register contains LBA bits 0-7 which are to be input. (L = 1) In CHS mode this register is ignored. (L = 0) Cylinder High/Low In LBA mode this register contains LBA bits 8-15 (Low) and bits 16-23 (High) which are to be set. (L = 1) In CHS mode this register contains the cylinder number which is to be input. (L = 0) H In LBA mode this register contains LBA bits 24-27 which are to be input. (L = 1) In CHS mode this register is ignored. (L = 0) L This indicates the LBA addressing mode. L = 0 specifies the CHS mode and L = 1 specifies the LBA addressing mode. D This indicates the device number bit. The device number bit of the Device/Head should be specified. D = 0 selects the master device and D = 1 selects the slave device. Input Parameters From The Device Sector NumberIn LBA mode this register contains the Adjusted max LBA bits 0-7. (L = 1) In CHS mode this register contains the maximum sector number (= 63). (L = 0) Cylinder High/Low In LBA mode this register contains the Adjusted max. LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) In CHS mode this register contains the max. cylinder number which is set. (L = 0) H In LBA mode this register contains the Adjusted max. LBA bits 24-27. (L = 1) In CHS mode this register contains the maximum head number (= 15). (L = 0) Travelstar 48GH, 30GN & 15GN hard disk drive specifications 166