IBM IC25N020ATDA04 Hard Drive Specifications - Page 210
Write Verify 3Ch: vendor specific
View all IBM IC25N020ATDA04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Input Parameters From The Device Sector Count This indicates the number of requested sectors not transferred. The Sector Count will be zero unless an unrecoverable error occurs. Sector Number This indicates the sector number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 0-7. (L = 1) Cylinder High/Low This indicates the cylinder number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) H This indicates the head number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) 13.41 Write Verify (3Ch: vendor specific) In the implementation of the drive the Write Verify command is exactly the same as the Write Sectors command (30h). No read verification is performed after the write operation. Refer to Figure 135, "Write Sectors Command (30h/31h)" on page 195 for parameters. Travelstar 48GH, 30GN & 15GN hard disk drive specifications 196