IBM IC25N020ATDA04 Hard Drive Specifications - Page 57
Safety, 6.11 Packaging, 10.1 UL and CSA approval, 10.2 IEC compliance, 10.3 German Safety Mark
View all IBM IC25N020ATDA04 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6.10 Safety 6.10.1 UL and CSA approval The product is qualified per UL (Underwriters Labratory) 1950 Third Edition and CAN/CSA C22.2 No.950-M95 Third Edition, for the use in Information Technology Equipment, including Electric Business Equipment. The UL Recognition or the CSA certification is maintained for the product life. The UL and C-UL recognition mark or the CSA monogram for CSA certification appears on the drive. 6.10.2 IEC compliance All models of the Travelstar 48GH, 30GN & 15GN comply with IEC 950:1991 +A1-4. 6.10.3 German Safety Mark All models of the Travelstar 48GH, 30GN & 15GN are approved by TUV on Test Requirement: EN 60950:1992+A1-4, but the GS mark has not been obtained. 6.10.4 Flammability The printed circuit boards used in this product are made of material with a UL recognized flammability rating of V-1 or better. The flammability rating is marked or etched on the board. All other parts not considered electrical components are made of material with a UL recognized flammability rating of V-1 or better except minor mechanical parts. 6.10.5 Secondary circuit protection This product utilizes printed circuit wiring that must be protected against the possibility of sustained combustion due to circuit or component failures as defined in C-B 2-4700-034 (Protection Against Combustion). Adequate secondary over current protection is the responsibility of the using system. The user must protect the drive from its electrical short circuit problem. A 10 amp limit is required for safety purpose. 6.11 Packaging Drives are packed in ESD protective bags and shipped in appropriate containers. Travelstar 48GH, 30GN & 15GN hard disk drive specifications 43