IC Realtime ICIP-B2732Z Product Manual - Page 40
IC Realtime ICIP-B2732Z Manual
View all IC Realtime ICIP-B2732Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Parameter Encode mode Resolution Frame Rate Bit Rate Type Recommended Bit Bit Rate I Frame Watermark Settings Function There are three options: H.264(main profile standard, H.264H (high profile standard), and MJPG encode. The H.264, H.264H both are H264 bit stream. H.264 is the Main Profile encode and the You need to enable the sub stream function in your camera and set the resolution as CIF. Then you can monitor via the Blackberry cell phone. MJPEG: In this encode mode, the video needs to large bit stream to guarantee the video definition. You can use the max bit stream value in the recommend bit to get the better video output effect. There are multiple resolutions. You can select from the dropdown list. For each resolution, the recommended bit stream value is different. Note: When video is under rotating status, you cannot set resolution higher than 1080P (excluding 1080P). PAL: 1~25f/s,NTSC: 1~30f/s.. The frame rate may vary due to different resolutions. There are two options: VBR and CBR. Please note, you can set video quality in VBR mode. Under MJPEG mode, only CBR is available. Recommended bit rate value according to the resolution and frame rate you have set. In CBR, the bit rate here is the max value. In dynamic video, system needs to low frame rate or video quality to guarantee the value. The value is null in VBR mode. Please refer to recommend bit rate for the detailed information. Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50. Recommended value is frame rate *2. By calibrating watermark, to see if video is modified. Select Watermark function. Default watermark is Digital CCTV. Watermark character can only be number, letter, _, within 128 characters. 5.1.2.2 Snapshot The snapshot interface is shown as in Figure 5- 8. 36