IC Realtime ICIP-B2732Z Product Manual - Page 56
IC Realtime ICIP-B2732Z Manual
View all IC Realtime ICIP-B2732Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Figure 5- 27 Please refer to the following sheet for detailed information. Parameter Function SNMP Version Check SNMP v1, device only process v1 info. Check SNMP v2, device only process v2 info. Check SNMP v3, can set username, password and encryption method. Server calibrate corresponding username, password and encryption method too access device and v1/v2 are unavailable. SNMP port The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535. The default value is 161 Community Read community Write community Trap address It is a string, as command between management and proxy, , defining a proxy, and a manager's authentication. Read-only access to all SNMP targets, default is public. Note: Only number, letter, _, and - supported. Read/write access to all SNMP targets, default is private. Note: Only number, letter, _, and - supported. The destination address of the Trap information from the proxy program of the device. Trap Trap Address Trap Port SNMP trap is a proxy message sent to admin as important event notice or status change. Address where to send Trap message. Port which send Trap message, default is 162, range 1~65535. 52