IC Realtime ICIP-B2732Z Product Manual - Page 80
System
View all IC Realtime ICIP-B2732Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Pre-record Disk Full Record mode Record stream Please input pre-record value here. For example, system can record the four seconds video in the buffer. The record begins from the fifth second. Note: Configure pre-record time, when alarm or motion detection occurs, if there is no record, system will record the preceding n seconds record. There are two options: stop recording or overwrite the previous files when HDD is full. Stop: Current working HDD is overwriting or current HDD is full, it will stop record. Overwrite: Current working HDD is full; it will overwrite the previous file. There are three modes: Auto/manual/close. There are two options: main stream and sub stream. 5.5 System 5.5.1 General The General interface is shown as in Figure 5- 62. Figure 5- 62 Please refer to the following sheet for detailed information. Parameter Device Name Function It is to set device name. 76