Icom IC-R6 Instruction Manual - Page 35
Programming memory/bank name - digital
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
MEMORY CHANNELS 5 ■ Programming memory/bank name Each memory channel can be programmed with an alphanumeric channel name for easy recognition, and can be displayed independently by channel. Names can be a maximum of 6 characters. q Push [V/M] to select the memory mode. w Rotate [DIAL] to select a desired memory channel. e H old down [S.MW](V/M) for 1 second to enter the select memory write mode. • 1 short and 1 long beep sounds. • The " " icon and memory channel number blink. t W hile holding down [FUNC], rotate [DIAL] to select a desired character. • The selected character blinks. y Rotate [DIAL] to move the cursor to the right or to the left. Memory name Bank name 5 u R epeat steps t and y until a desired 6-character channel name is displayed. i H old down [S.MW](V/M) for 1 second to program the name and exit the programming mode. • 3 beeps sound. r W hile holding down [MODE], rotate [DIAL] to select the "M NAME" or "B NAME" item when programming the memory name or the bank name, respectively. • The item can also be selected by pushing [MODE] repeatedly. Memory name selection Bank name selection • Available characters A to Z, 0 to 9 and space. NOTE: Only one bank name can be programmed into each bank. Therefore, the previously programmed bank name will be displayed when bank name is selected. Also, the programmed bank name is automatically assigned to another bank channel. • After releasing [MODE], a line blinks under the first digit, and the " " icon blinks. 22