Icom IC-R6 Instruction Manual - Page 39
Transferring memory contents
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
■ Transferring memory contents The contents of programmed memory channels can be transferred to other memory channels. q H old down [S.MW](V/M) for 1 second to enter the select memory write mode. • 1 short and 1 long beep sounds. • The " " icon and memory channel number blink. • Do not hold down [S.MW](V/M) for more than 2 seconds. Otherwise the memory contents will be copied to the VFO. w R otate [DIAL] to select a desired memory channel to be transferred. e W hile holding down [MODE], rotate [DIAL] to select the "CLEAR" item, then release [MODE]. • Pushing [MODE] repeatedly also selects the "CLEAR" item. r Hold down [S.MW](V/M) for 1 second. • The displayed contents are cleared. CONVENIENT!: Instead of doing steps e and r, while holding down [FUNC], pushing and holding [S.MW](V/M) for 1 second also clears the contents. t Rotate [DIAL] to select a desired target memory channel. y H old down [S.MW](V/M) for 1 second to transfer the con- tents. MEMORY CHANNELS 5 • Example Transferring the contents of memory channel 51 to channel 33. Steps q and w [DIAL] 5 Step e Step r Step t Step y 26