Icom IC-R6 Instruction Manual - Page 40
Erasing/transferring bank contents
![]() |
View all Icom IC-R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5 MEMORY CHANNELS ■ Erasing/transferring bank contents The contents of programmed memory channels can be erased or transferred to other memory channels. INFORMATION: Even if the memory bank contents are erased, the memory channel contents still remain programmed. q S elect a desired bank contents to be transferred or erased from the bank. ➥ Push [V/M] to select the memory mode. ➥ While holding down [BAND], rotate [DIAL] to select a desired memory bank group. ➥ Rotate [DIAL] to select the bank channel. w H old down [S.MW](V/M) for 1 second to enter the select memory write mode. • 1 short and 1 long beep sounds. • Do not hold down [S.MW](V/M) for more than 2 seconds. Otherwise the bank contents will be copied to the VFO. e W hile holding down [MODE], rotate [DIAL] to select the "BANK" item. • Pushing [MODE] repeatedly also selects the "BANK" item. r W hile holding down [BAND], rotate [DIAL] to select a desired bank group to transfer. Or, select the d��i�s��p�l�a�y���w���h���e��n����e���r�a���s�i�n�g��t��h��e����c��o���n���t�e��n��ts� from the bank. • If i��s����s��e���l�e���c���te��d��in���th��is���s���t��e���p s���k���i�p���s�t�e�p� t, and go to step y. [DIAL] To transfer the bank contents in bank E. To erase Hold down for 1 sec. t Rotate [DIAL] to select a desired bank channel. yHold down [S.MW](V/M) for 1 second to erase or transfer the bank contents. • The original memory channel number is automatically displayed, then the " " icon and the memory channel number blink. 27
![](/manual_guide/products/icom-icr6-instruction-manual-a7715c1/40.png)