Icom ID-52A About The Dv Gateway Function - Page 2

■■About the transceivers In this document, Using the following transceivers is described. Transceivers System requirements ID-31A PLUS / ID-31E PLUS OPC-2350LU data cable ID-51A (PLUS2) / ID-51E (PLUS2) LLIf your Android device has a USB Type-C port, you need a USB On-The-Go (OTG) adapter to convert the data cable's plug to USB Type-C. ID-52A / ID-52E Purchase the proper USB cable according to your device's USB port. •• For the micro-B port: OPC-2417 data cable (USB micro-B/USB micro-B) •• For the Type-C port: OPC-2418 data cable (USB micro-B/USB Type-C) •• For the Type-A port: User supplied NOTE: When you use a PC, download the USB driver and the installation guide from the Icom website. •• When using the OPC-2350LU, enter "OPC-2350LU" into the Search box in the site. •• When using other cable, enter the transceiver's model name into the Search box in the site Icom website https://www.icomjapan.com/support/ ■■System requirements (As of November 2020) Software / Application When you use a PC RS-MS3W When you use a Android device RS-MS3A System requirements Operating system Microsoft® Windows® 10 (32/64 bit) Microsoft® Windows® 8.1 (32/64 bit) (Except for Microsoft® Windows® RT.) USB port A USB 1.1, USB 2.0, or USB 3.0 Data device for Android™ •• Android™ version 5.0 or later The RS-MS3A has been tested with Android 5.x.x, 6.x.x, 7.x.x, 8.x, 9.0, and 10.0. LLIf your device is Android version 4.x.x, you can use RS-MS3A version 1.20, but cannot update RS-MS3A. LLWhen using the ID-52A/E, the RS-MS3A version 1.31 or later is required. •• USB host function on the Android™ device LLThe USB host function is needed to use a USB device with an Android device. To check whether or not your Android device has the USB host system, ask the Android device's manufacturer. LLDisplay indications may differ depending on the PC or Android device's OS. LLIn addition to this document, read the RS-MS3W or RS-MS3A instruction manual. They can be downloaded from the Icom website. 2