Icom IP740D Instruction Manual - Page 29

5 OTHER FUNCTIONS Using the Emergency Call function (Continued) The transceiver enters the Emergency mode through the following functions, depending on a presetting: D The Stationary Detection function When the transceiver is detected as being stationary (no motion) for the ON Timer preset time� L If a user moves the transceiver during the Reminder Timer set time, the Emergency mode is canceled� Enters the Emergency mode. Sends an Emergency call. D The Motion Detection function When the transceiver continuously moves for the ON Timer preset time� L If a user holds down [Emer] for the Emer SW OFF Timer (Sec) set time, before the Reminder Timer set time expires, the Emergency mode is canceled� Enters the Emergency mode. Sends an Emergency call. Acceleration Acceleration ON Timer Reminder Timer Emergency Timer No motion is detected. Stationary Sensitivity Time If moving during the Reminder Timer, the Emergency mode is canceled. NOTE: The Stationary Detection function may not properly work, depending on the surrounding environment such as obstructions, weather condition, and so on� Icom is not responsible for the destruction or damage caused by using the Stationary Detection function� ON Timer Motion is detected. Reminder Timer [Emergency] Emergency Timer Motion Sensitivity Time If holding down [Emergency] during Reminder Timer, the Emergency mode is canceled. NOTE: The Motion Detection function may not properly work, depending on the surrounding environment such as obstructions, weather condition, and so on� Icom is not responsible for the destruction or damage caused by using the Motion Detection function� 5-8