Icom IP740D Instruction Manual - Page 39

6 SET MODE Set mode items (Continued) The shaded items are also displayed in the Basic Set mode. LLItems or default values may be differ, depending on the transceiverʼs version or presettings. Ask your dealer for details. DDCellular Item Success Tone Failure Tone Call Tone (IND/ GRP/ALL/ TEL) Crtsy Beep (IND/GRP/ALL/ TEL) RX Tone (IND/GRP/ALL/ TEL/MSG) Notify Type (IND/GRP/ALL/ TEL) Notify No. (IND/GRP/ALL/ TEL/MSG) RX Notify Actn. Out of Rng Tone Range Side Tone Sidetone Sidetone Volume*6 Description Selects whether or not to enable the tone that indicates an individual call was successfully transmitted. LLThe transmission result is also displayed on the screen. Option/range ON or OFF Selects whether or not to enable the tone that indicates an individual call failed. LLThe transmission result is also displayed on the screen. ON or OFF Sets the call Initiation tone. OFF, Tone1 ~ Tone8 LLLarger number makes the tone lower. Sets the call Termination beep. OFF, Tone1 ~ Tone8 LLLarger number makes the tone lower. Sets the call Receive tone. OFF, Tone1 ~ Tone8 LLLarger number makes the tone lower. Sets the call receive notification type. P-Bell or Pocket beep Sets the number of tones. Continuous (Except for "MSG"), 1, 3, 10, 20 (times) Sets the call or message receive notification type. Tone, Vibration, or Tone + Vibration Selects whether or not to enable the Out- OFF or ON of-Area Warning Beep. The beep also sounds when the transceiver reenters the service area. Selects whether or not to mute the Side OFF or ON Tone when the transceiver is out-of-area. Selects whether or not to output your voice to a headset that is connected to the transceiver. LLThe function outputs your voice even if you are not holding down [PTT], depending on the attached microphone. (p. 7-5) OFF or ON Sets the Side tone volume. 0 ~ 32 Default ON ON Tone1 (Pi) Tone1 (Pi) OFF P-Bell 3 (times) Tone OFF OFF OFF 10 *6 Displayed only when "ON" is selected in the "Sidetone" item. 6-7