Icom IP740D Instruction Manual - Page 47
Using The Bc-226 Desktop Charger, Caution, Warning: Never
![]() |
View all Icom IP740D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
7 FOR YOUR REFERENCE Options (Continued) DDUsing the BC-226 desktop charger Charging time: approximately 4.2 hours for the BP-303. CAUTION: Before using the charger, read the ‛Battery caution' and ‛Charging caution' on the INSTRUCTIONS that boxed with the transceiver. Status indicator Light color Status Orange Charging Green Charging is completed. Blinks orange Charging failed. It may have some and green problems. NOTE: ••The transceiver MUST be turned OFF while charging. Otherwise: - The battery will not be charged properly. - The battery life may be shortened. ••Do not transmit while charging. When you need to transmit, remove the transceiver from the charger, and then turn ON the power. ••If the battery pack does not properly charge when it is attached to the transceiver, remove it from the transceiver and insert only the battery pack into the charger. Connecting the BC-226 toghther You can connect up to 6 BC-226 together. 1. Remove the charger's right cover. (1) 2. Snap the DC power plug to the another charger's DC power jack. (2) WARNING: NEVER connect more than 6 chargers together. It may result in an electric shock, cause a fire, overheating, or damage chargers. Fuse replacement If a fuse blows, find and repair the cause of the problem. Then replace the damaged fuse with a new, adequately rated fuse. Fuse type: 5 A/58 V (low profile mini blade fuse) NOTE: Remove the fuse using needle-nose pliers. Battery pack Turn OFF Power adapter (BC-228) BC-226 Status indicator 2 1 Fuse 7-6
![](/manual_guide/products/icom-ip730d-instruction-manual-ff9e64e/47.png)