Icom IP740D Instruction Manual - Page 34
Using the Set mode, Basic Set mode, Detailed Set mode
View all Icom IP740D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6 SET MODE Using the Set mode You can use the Set mode to set infrequently changed values or function settings. The transceiver has 2 types of Set modes, as shown below. LLYou cannot transmit or receive while the transceiver is in the Set mode. DDBasic Set mode 1. Turn OFF the transceiver, if it is turned ON. 2. While holding down [FUNC], rotate [VOL] to turn ON the transceiver. ••The Set mode is displayed. LLRelease finger from [FUNC] when "SET" is displayed. 3. Rotate Rotary Selector or push [▲] or [▼] to select an item group "Common," "Cellular," or "IDAS," and then push [FUNC]. LLSelect "Certification" and then push [FUNC] to display certification information. SET SET MODE Common DDDetailed Set mode 1. Turn OFF the transceiver, if it is turned ON. 2. While holding down [FUNC] and [Address], rotate [VOL] to turn ON the transceiver. ••The Detailed Set mode is displayed. LLRelease finger from [FUNC] when "SET (Detail)" is displayed. 3. Rotate Rotary Selector or push [▲] or [▼] to select an item group "Common," "Cellular," or "IDAS," and then push [FUNC]. SET(Detail) SET MODE Common DDUsing the Set mode Example: Disabling the key touch beep. 1. Turn OFF the transceiver, if it is turned ON. 2. While holding down [FUNC] and [Address], rotate [VOL] to turn ON the transceiver. ••The Detailed Set mode is displayed. LLRelease finger from [FUNC] when "SET (Detail)" is displayed. 3. Rotate Rotary Selector or push [▲] or [▼] to select an item group "Common," and then push [FUNC]. 4. Push [FUNC] or [Address] several times to select "Key-Touch Beep." 5. Rotate Rotary Selector or push [▲] or [▼] to select "OFF." 6. Push [CLR/Lock] to exit "Key-Touch Beep." LLPush [CLR/Lock] again to exit the Set mode and return to the Standby screen. SET(Detail) Key-Touch Beep OFF 6-2