Image Fitness 10.4 English Manual - Page 6
Assembly
View all Image Fitness 10.4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the included 7/32" alien wrench 1. Tighten a Console Knob (5) into each end of the Console Crossbar (11). 1 5 11 2. Loosen the Resistance Control (43) at the lower end of the Right Upright (23) and the Left Upright (not shown). Raise the Uprights to the position shown. Hold an Upright Spacer (70) inside the bottom of the Right Upright. Insert a 3/8" x 4" Bolt (54), with an Upright Washer (53), into the lower hole near the bottom of the Right Upright and through the Upright Spacer. Using the 7/32" alien wrench, tighten the Bolt into the Frame (128). Insert a 3/8" x 4" Bolt (54), with an Upright Washer (53), into the other hole near the bottom of the Right Upright (23). Using the 7/32" allen wrench, tighten the Bolt into the Frame (128). 3. Hold an Upright Spacer (70) inside the bottom of the Left Upright (2). Insert a 3/8" x 4" Bolt (54), with an Upright Washer (53), into the lower hole near the bottom of the Left Upright and through the Upright Spacer. Using the 7/32" alien wrench, tighten the Bolt into the Frame (128). Insert a 3/8" x 4" Bolt (54), with an Upright Washer (53), into the other hole near the bottom of the Left Upright (2). Using the 7/32" allen wrench, tighten the Bolt into the Frame (128). 4. Loosen the Console Knob (5) in each end of the Console Crossbar (11). Rotate the Console (104) to the desired angle. Firmly tighten the Console Knobs. 2 43 23 5 54 128 89 70 3 53 54 53 54 2 54 53 4 104 70 128 5 11 6