Image Fitness 933 Treadmill English Manual - Page 5

OPERATION AND ADJUSTMENT CONVERTING THE TREADMILL TO THE OPERATING POSITION Set the treadmill in a cleared area and remove all packing materials from the treadmill. Make sure that all parts are included before disposing of the packing materials. For your convenience, the treadmill is delivered to you completely assembled. The treadmill is in the compact storage position. To convert the treadmill to the operating position, first place a Knob Washer (13) on each Upright Knob (14). Raise the Upright (10) to the vertical position, and tighten an Upright Knob into each side of the Upright. 'po 10 13 14 GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet box cover is grounded before using an adapter. 1 2 Grounded Outlet Box Grounding Plug • • 0 0•° Grounding Pin Grounded Outlet Grounded Outlet Box 0 Adapter Grounding Pin /ii • • Grounding Plug Lug Metal Screw 5