Insignia IS-DVD100121 User Manual (English) - Page 16
Optional TV Connections, Connection to an, Amplifier
View all Insignia IS-DVD100121 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
RF coaxial connection Connect the RF.OUT jack on the Recorder to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R). How to set the Recorder's RF output channel 1. When the Recorder is turned off, press and hold CH (V/v) on the front panel for more than five seconds. [RF-03] or [RF-04] appears in the display window. 2. Press CH (V/v) to change the RF output channel (RF-03 or RF-04). 3. Tune the TV to this channel. Notes: • Set Progressive Scan option to [ON] in the setup menu, see page 20. • Progressive Scan does not work with the RF, Audio/Video or S-Video connections. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled. • When you use Component Video signal, set the Progressive Scan to [OFF] on the setup menu. Audio connection Connect the Left and Right DVD/VCR AUDIO OUT jacks on the Recorder to the audio left/right in jacks on the TV using the supplied audio cables (A1 or A2). Video connection Connect the DVD/VCR VIDEO OUT jack on the Recorder to the video in jack on the TV using the video cable supplied (V). Note: If you use this connection, set the TV's source selector to VIDEO. Connection to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system using the audio cables (A) supplied. Optional TV Connections These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks. Rear of Recorder S-Video connection Connect the S-VIDEO OUT jack on the Recorder to the S-Video in jack on the TV using the optional SVideo cable (S). Component Video / Progressive Scan connection If your television is a high-definition or "digital ready" television, you may take advantage of the Recorder's progressive scan output for the highest video resolution possible. Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the Recorder to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C). O A X OPTICAL DIGITAL INPUT Amplifier (Receiver) L R AUDIO INPUT COAXIAL DIGITAL INPUT Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. 16