Insignia NS-32L430A11 User Manual (English) - Page 8

NS-32L430A11 Insignia 32" LCD TV 720p Insignia 32" LCD TV 720p Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-32L430A11 represents the state of the art in LCD TV design and is designed for reliable and trouble-free performance. Install the stand or wall-mount bracket To set your TV on a cabinet or other flat surface, you must install the stand. To mount your TV on a wall or other vertical surface, you must remove the stand. Warning Before attempting assembly or removal of the stand, unplug the AC power cord. Cautions • Read these instructions carefully before you try to install the stand or a wall-mount bracket. • If you are not sure you can install the stand or wall-mount bracket, consult a professional installer or service personnel. Your warranty does not cover damages or injuries that happen due to mishandling or incorrect assembly. • When installing the stand or wall-mount bracket, make sure that you place your TV on a soft cushion or covering to prevent scratching or damage to your TV's finish or screen. To install the stand: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Align the bracket on the stand with the slot on the base of your TV, then carefully push the bracket into the slot. 3 Secure the stand with the three M4 x L14 mm screws (included). 4 Set your TV upright on a stable surface. To install a wall-mount bracket: 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Carefully remove the three screws that secure the stand to the TV, then remove the stand. 3 Secure the wall mount bracket to the back of your TV using the four M4 screws provided with the bracket. Screw length should not be over 11 mm. Vertical bracket measurement: 3.94" (100 mm) Horizontal bracket measurement: 7.87" (200 mm) 4 www.insigniaproducts.com