Insignia NS-40D420NA16 User Manual (English) - Page 22
Coaxial (good), ANT/CABLE IN, INPUT, ENTER
View all Insignia NS-40D420NA16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NS-40D420NA16/NS-40D420MX16 Insignia 40" 1080p 60Hz LED TV Coaxial (good) On your TV Cable or satellite box Cable wall jack Side of TV Coaxial cable connector ANT/CABLE IN jack Coaxial cable 1 Make sure that your TV's power cord is unplugged and all connected devices are turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack on the cable or satellite box. 4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box. 5 Press INPUT to open the INPUT SOURCE list. 6 Press S or T to highlight TV, then press ENTER. 7 If you cannot tune to channels you know exist, scan for channels. See Automatically scanning for channels on page 50. Notes • Use a coaxial cable to eliminate interference and noise from radio waves. • Do not bundle the coaxial cable with the power cord or other cables. www.insigniaproducts.com 17