Insignia NS-CL19C User Guide - Page 9
Connecting to a VCR or other AV source, Connecting to a cable box - tv
View all Insignia NS-CL19C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Insignia NS-CL19C 19" Combo DVD/LCD TV Connecting to a VCR or other AV source 2 Connecting to a cable box 1 To connect your TV to a VCR or other AV source: 1 Turn off the TV and the VCR (or other source). 2 Connect an RCA video cable to the VCR (1), then to the VIDEO IN jack on the back of the TV (2). - OR Connect an S-Video cable to the VCR, then to the S-VIDEO jack on the back of the TV. 3 Connect RCA audio cables to the VCR's audio output jacks, then to the AUDIO L and R jacks on the back of the TV. 4 Turn on the TV and the VCR. 5 Set the VCR output switch to channel 3 or 4, then tune your TV to the same channel. 6 Press the INPUT button to set the TV's signal input to AV or S-VIDEO. 2 1 To connect your TV to a cable box with an RF cable (1): 1 Turn off the TV and the cable box. 2 Connect a 75 ohm RF cable from the cable box to the ANT IN jack on the back of your TV. 3 Set the cable box output switch to channel 3 or 4, then tune your TV to the same channel. 4 Turn on the TV and the cable box. 5 Change channels at the cable box or with the cable box remote. To connect your TV to a cable box with a AV cables (2): 1 Turn off the TV and the cable box. 2 Connect RCA video and audio cables from the cable box to the VIDEO and AUDIO IN jacks on the back of your TV. • Yellow - Video • White - Audio left • Red - Audio right 3 Turn on the TV and the cable box. 4 Press the INPUT button to set the TV's signal input to AV or S-VIDEO. 5 Change channels at the cable box or with the cable box remote. www.insignia-products.com 9