Insignia NS-DRVCR User Manual (English) - Page 10
Setting up your recorder - user manual
View all Insignia NS-DRVCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
NS-DRVCR DVD Recorder/VCR Item Button Function 32 DVD - Press to search BACKWARD backward or forward. and FORWARD VCR - Press to search a tape on fast backward or forward. In STOP mode, press to rewind or advance the tape (picture not visible). 33 I.SKIP (instant Press to skip ahead 30 skip) seconds during DVD playback. 34 0 - 9 number Press to select numbered buttons options in a menu or to enter a channel number directly. 35 DVD Press to change the recorder's function mode to DVD. Setting up your recorder Unpacking and setup Your carton should contain: • DVD/VCR recorder • User Guide • Remote control unit • Video cable • Audio cable • Batteries (2) If you need to replace any of these items, call our help line mentioned in the Warranty section of this guide. Carefully remove all the components from the carton and make sure that you have all the necessary components before you dispose of the carton. • Remove all packing materials from the individual components. • Do not remove any labels or stickers on the back panel of your recorder. • Place your recorder in the location you want. Your recorder is designed to be used on a level, stable, flat surface, such as a table, desk, shelf, or stand convenient to a power outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, or vibration. • Unwind the AC power cord on the back of your recorder and extend the cord to its full length. Power source Use the polarized AC line cord provided for operation on AC power. Insert the AC cord plug into a standard 120 V 60 Hz polarized AC outlet. If you cause a static discharge when touching your recorder and your recorder fails to function, unplug your recorder from the AC outlet and plug it back in. Your recorder should return to normal operation. Warning • The system uses a polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized power outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your power outlets, you probably have outdated, non-polarized outlets which should be changed by a qualified, licensed electrician. Do not file the wide blade on the plug or use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock. • Never connect the AC cord plug to other than the specified voltage (120 V 60 Hz). Use the attached power cord only. Connecting to an antenna or cable TV Depending on your TV and other equipment, there are various ways you can connect the recorder. Refer to the manuals of your TV, VCR, stereo system, or other devices, as necessary, for additional information. Note • Make sure that the recorder is connected directly to the TV and tune the TV to the correct video input channel. • Do not connect the recorder's AUDIO OUT jack to the Phono in jack (record deck) of your audio system. Do not connect the recorder through another VCR. The DVD image could be distorted by the copy protection system. • The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off your recorder after removing the disc. Antennas Flat wire (300 ohm) Cable TV wall jack 300/75 ohm or or adapter (not supplied) Back of recorder Back of cable box Cable TV wall jack www.insignia-products.com 9