Insignia NS-DRVCR User Manual (English) - Page 17
The on-screen display
View all Insignia NS-DRVCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
NS-DRVCR DVD Recorder/VCR Menu Language Settings Audio Settings Lock Settings Recording Settings Available settings Display Menu-You can select a language for the setup menu and information display. Disc Menu-You can select a language for the DVD menu. Disc Audio-You can select a language for the DVD audio. Disc Subtitle-You can select a language for the DVD subtitle. Dolby Digital/DTS/MPEG-You can select Bitstream (if you connect to equipment with Dolby Digital, DTS, or MPEG decoder), or PCM (to automatically downmix to two-channel PCM audio). Sampling Freq.-You can select 96 kHz or 48 kHz (if your receiver or amplifier is not capable of decoding 96 kHz signals). DRC (Dynamic Range Control)-You can set the DRC to On if you want to listen to a movie at a lower volume, without losing clarity. Rating-You can select the rating restrictions for your DVD player. Ratings are 1-8 (1 is the most restrictive). When you select this option, you must enter a password. Set Password-You can enter or change your password. Note: If you forget your password, you can clear the password by going to the Setup menu, selecting Start, then pressing ENTER. Input the six-digit number (210449), select OK when the message appears, then press ENTER. The password is cleared. Area Code-You can enter the area code whose standards were used to rate the DVD (see "Area code list" on page 31). Disc Record Mode-You can set the picture quality for recording a DVD. (XP=excellent, SP=standard, LP= low, EP=extended.) VCR Record Mode-You can set the picture quality for recording a video tape. (SP=standard, SLP=long play.) DV Record Audio-You can set this to choose which of two digital camcorder soundtracks to use. Audio 1 (to use the sound that was recorded when a recording was made), or Audio 2 (to use the overdubbed sound). Auto Chapter-You can set the auto chapter markings (made during recording) to 5 minute intervals, 10 minute intervals, or None. Menu Available settings Disc Settings Initialize-Formats a DVD for recording. For DVD-RWs, you can choose VR Mode or Video Mode. For DVD+RWs you can choose OK. Caution: If you change the format of a DVD, the disc is erased. Finalize-Fixes the recordings in place so the DVD can be played on a regular DVD player or a computer with a suitable DVD-ROM drive. Caution: If you finalize a DVD-R or DVD+R, you cannot edit or record anything else on the disc. Disc Label-You can enter a name for the DVD. See "Naming a title" on page 27 for information on using the Keyboard menu. Disc Protect-You can protect recordings, depending on the type of DVD you are using. For DVD+RWs, it prevents editing, erasing, overwriting, or regular recording. For DVD+Rs or DVD-RWs (VR mode), it prevents editing, erasing, and regular recording. It is not compatible with DVD-RWs in Video mode or DVD-Rs. To unlock a DVD, select OFF. AutoPlay-Turning this ON will bypass the Disc menu and trailers and start playing the movie automatically. About DivX®-Provides you with a registration code that lets you rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Note: The videos downloaded from DivX VOD can only be played back on your recorder. The on-screen display Some DVDs require specific operation or allow only limited operation during playback. When this occurs, is displayed, action prohibited or not available. Displaying information while watching TV While watching TV, press DISPLAY to display or remove the information displayed on-screen. In the example a DVD-RW in VR mode is inserted. Disc name Record mode, free Channel number and format space, and elapsed time and audio input Audio output Date and time Operational mode of recorder 16 www.insignia-products.com