Insignia NS-DRVCR User Manual (English) - Page 14

NS-DRVCR DVD Recorder/VCR 4 Select Auto or Manual to set the clock, then press ENTER. Auto • Press / to choose your Time Zone. • Press to choose the Daylight Savings option. Press / to choose Auto, ON, or OFF. • Press ENTER to confirm your setting. Manual • Enter the necessary information for year, date, and time. / (left/right): Moves the cursor to the previous or next column. / (up/down): Changes the setting at the current cursor position. • Press ENTER to confirm your setting. 5 Press ENTER to exit the menu. Note You can reset the Initial Setup Wizard from the Factory Set option in the setup menu (see "General Settings" on page 15). Playing a tape To play a tape: 1 Press VCR to switch control to the VCR deck. 2 Insert a pre-recorded video cassette. • If the recorder is turned off, it turns on automatically when the tape is loaded. • If the Timer indicator lights on the front panel display window, press POWER once. 3 Press PLAY ( ) to start playback. If a tape without a safety tab is inserted, the recorder starts playback automatically. 4 Press STOP ( ) to stop playback. If the tape reaches the end before you press STOP ( ) the recorder automatically stops, rewinds, then ejects the tape. Note S-VHS Quasi Playback (SQPB) • Your recorder can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes. VCR playback options Buttons EJECT ( ) PAUSE ( ) FORWARD ( ) Operations Press to eject the tape in the VCR deck. Press to pause playback. Press repeatedly to step forward one frame at a time Note: After 5 minutes in STILL mode the recorder stops to protect the tape and video heads. Press to scan forward. In STOP mode, fast forwards the tape. In PAUSE mode, starts slow motion playback Note: After 3 minutes in SEARCH or SLOW MOTION mode the recorder returns to PLAY mode to protect the tape and video heads. Buttons Operations BACKWARD ( ) Press to scan backward. In STOP mode, rewinds the tape. Note: After 3 minutes in SEARCH mode the recorder returns to PLAY mode to protect the tape and video heads. CLEAR Press to reset the current tape counter to 0:00:00. To automatically go to tape counter position 0:00:00, press RETURN while the tape is in STOP mode. TRACK ( +/ -) Press to manually reduce noise on the screen during tape playback. Tracking is set automatically when a tape is inserted. AUDIO Press to set the tape audio to HIFI, LEFT, RIGHT, or NORMAL. Press the / buttons to select the tape audio you want. I.SKIP Press repeatedly during playback to skip forward 30 seconds on the tape (max. 120 seconds.) Playing a disc To play a disc: 1 Press DVD to switch control to the DVD deck. 2 Press OPEN/CLOSE ( ) to open the disc tray. 3 Load the disc into the tray, with the playback side down. 4 Press OPEN/CLOSE ( ) to close the tray. Playback starts automatically. If playback does not start, press PLAY ( ) or start the playback using the HOME menu. 5 To stop the playback, press STOP ( ). The recorder records the stopped point, depending on the disc. appears on the screen briefly. Press PLAY ( ) to resume playback (from the stopped point). If you press STOP ( ) again or unloaded the disc, ( appears on the screen and the recorder clears. 6 Press OPEN/CLOSE ( ) to open the tray and remove the disc. Press OPEN/CLOSE ( ) to close the disc tray, or press POWER ( ). The disc tray closes automatically and recorder turns off. Note If parental control is set and the DVD is not within the rating settings, you must input the password. (See "Lock Settings" on page 16). Disc playback features Buttons Operations Discs OPEN/CLOSE Press to open or close the disc All () tray. www.insignia-products.com 13