Insignia NS-FDRE44W1 User guide - Page 24
Step 3: Level your dryer, Step 4: Installing the drain hose optional
![]() |
View all Insignia NS-FDRE44W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
INSTALLATION INSTRUCTIONS Step 3: Level your dryer • To minimize vibration, noise, and unwanted movement, the floor must be a level, solid surface. • If your dryer is not level, carefully tilt your dryer just enough to adjust the leveling feet on the bottom of your dryer. Extend the feet only as much as is necessary. If the feet are extended too much, your dryer may vibrate. Note: If extending the legs isn't enough to level your dryer, use a flat, wooden board to make your dryer level. Level Loosen Tighten Adjustable leg Step 4: Installing the drain hose (optional) You can set up your dryer to automatically drain water with the included drain hose. If you don't want to connect the drain hose, water will collect in the water reservoir and you'll need to empty it after each use. 1 Remove the drain hose from the holder. Drain hose 24 www.insigniaproducts.com
![](/manual_guide/products/insignia-nsfdre44w1-user-guide-4cd62c3/24.png)