Insignia NS-FDRE44W1 User guide - Page 46

INSTALLATION INSTRUCTIONS PROBLEM SOLUTION Dryer shuts off before the clothes are dried. Clothing is still wrinkled after using the Wrinkle Prevent setting. There is lint on the clothing. The indicator is lighting The indicator is lighting Clothing is not dry enough or the drying time is too long • The dryer load is too small. Add more items or a few towels and restart the cycle. • The dryer load is too large. Remove some items and restart the cycle. • Consider using a Time dry cycle. • Small loads of one to four items work best. • If the dryer load is too large, items cannot tumble freely. Try loading fewer items. • Make sure that the items in the dryer load are similar. The Wrinkle Prevent setting works best when the items in the dryer load are similar-type items. • Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can break up into small pieces that turn into lint. • Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog the filter. • Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers (like a pair of black linen pants). • Divide larger loads into smaller loads for drying. • Clean the lint filter. • When you turn on the power and before you start your dryer, the lint filter indicator automatically flashes for 10 seconds to remind you to check the filter. • When the cycle is finished, flashes and the dryer beeps for five seconds. Check the water reservoir: • If it is full, pour out the condensate water and restart the dryer. • If the reservoir is not full, you can restart the dryer. • If the water full indicator is still on, contact Customer Service. • Clean the lint filters. • Empty the water reservoir. • Make sure that the drain hose (if connected) is draining properly. • Make sure that your dryer has enough ventilation. • Clean the moisture sensors. • Make sure that the air inlet is clear and clean. • Select a higher drying intensity or time cycle. 46 www.insigniaproducts.com