Insignia NS-FDRE44W1 User guide - Page 43
Maintaining your dryer, Cleaning the heat exchanger, Cleaning the exterior, Cleaning the drum
View all Insignia NS-FDRE44W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
NS-FDRE44W1/NS-FDRE44W1-C Maintaining your dryer For information about cleaning your lint filters, see "Cleaning the lint filters" on page 35. Cleaning the heat exchanger WARNING: Do not touch the heat exchanger with your hand. This may cause an injury. • Clean the heat exchanger approximately once every two months. • Remove the lint from the heat exchanger using a vacuum cleaner with a dusting brush attached. • Do not apply any pressure or the heat exchanger may be damaged. The dryer will not dry if the cooling fins are damaged or bent. • Follow the instructions on the label on the heat exchanger cover. The heat exchanger is behind the base filter. See Cleaning the base filter on page 36. Cleaning the exterior • Clean with a soft, damp cloth. Do not use abrasive substances. • Protect the surface from sharp objects. • Do not place any heavy or sharp objects or a detergent box on the dryer. Keep them in a separate storage area. These items may scratch or damage the top cover of the dryer. • Because the entire dryer has a high-gloss finish, the surface can be scratched or damaged. Avoid scratching or damaging the surface when using the dryer. Cleaning the drum • Clean with a damp cloth dampened with a mild, non-abrasive cleaner suitable for stainless steel and anodized surfaces. • Remove the cleaner residue and dry with a clean cloth. Cleaning the control panel • Clean with a soft, damp cloth. Do not use abrasive substances. • Do not spray cleaners directly on the panel. www.insigniaproducts.com 43